For more details, please see ourCookie Policy.

Fibre Channel (SAN)

New Contributor
Posts: 2
Registered: ‎11-18-2008
Accepted Solution

4100 FOS target path

We have two fabrics with one 4100 at FOS 5.2.0a, one 300 at FOS 6.1.0c, one 5100 at FOS 6.3.1a and one 6510 at FOS 7.0.0 in each fabric. Now we have to join two new switches (6520 at FOS 7.2.0d) to these fabrics. We know the target path for the 300, 5100 and 6510, but I'm not sure about the 4100.  My understanding is (please correct me if I am wrong) that I have to upgrade the 4100 from 5.2.0a -> 6.2.2e -> 6.3.2d -> 6.4.3d -> 7.0.2c -> 7.1.1c (I think the last supported for 4100).

Please advise.

Broadcom Moderator
Posts: 415
Registered: ‎08-31-2009

Re: 4100 FOS target path



4100 switches are supported until 6.4.3h.

From 5.2.0a, you have to jump to 5.3.2c, 6.0.0c, 6.1.2c, 6.2.2f, 6.3.2d, 6.4.3h


Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.