For more details, please see ourCookie Policy.


Info & Feedback

Reply
New Contributor
Posts: 3
Registered: ‎02-21-2019

How to configure BRODCOM LB for public(static) IP

Hi All,

 

We are using brocade load balancer to manage traffic for our application servers. The load balancer is having VIP binded with its Public IP.

 

We have configured the traffic on VIP for https by creating internal DNS and ssl certificate for same and the overall traffic is working fine. Because of this configuration the application is accessible within organisation.

 

Now we want make this application accessible from internet by exposing it over internet but not able to configure the same, so need help in configuration of traffic for application access on public ip binded with lb VIP of load balancer.

 

The DNS and SSL are registered for public IP which will be needed in this configuration.

 

We are having 2 physical nodes of load balancer along with VIP as 10.xx.xx.xx and Public ip as 21x.**filtered**.**filtered**.**filtered**.

External Moderator
Posts: 5,620
Registered: ‎02-23-2004

Re: How to configure BRODCOM LB for public(static) IP

@vishalkhankar 

 

there are no Load Balancer from Broadcom available.

 

I assume you mean old Brocade ADX ?

TechHelp24
Highlighted
New Contributor
Posts: 3
Registered: ‎02-21-2019

Re: How to configure BRODCOM LB for public(static) IP

Yes, its Brocade Virtual Traffic Manager SSC 10.4r1

New Contributor
Posts: 3
Registered: ‎02-21-2019

Re: How to configure BRODCOM LB for public(static) IP

Yes, its Brocade Virtual Traffic Manager SSC 10.4r1
External Moderator
Posts: 5,620
Registered: ‎02-23-2004

Re: How to configure BRODCOM LB for public(static) IP

@vishalkhankar 

 

vTM was acquired by PulseSecure.

 

Please post such question on they Community

TechHelp24

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.