For more details, please see ourCookie Policy.

Management Software

Posts: 0

Brocade mibs with net-snmp


I want to monitor some brocade equipments (DCX4S in particular) by net-snmp on Linux.

I have copied all mib files to /usr/share/snmp/mibs.

However when I retrieve a SNMP value, it is not decoded.

For example :

snmpwalk -v2c -c public x.x.x.x .

SNMPv2-SMI::enterprises.1588. = INTEGER: 1

Thanks in advance.


Posts: 0

Re: Brocade mibs with net-snmp

Is that DCX has VF enabled you must use SNMP v3, otherwise v1 is fine.

With regards to the OID , . translates to swOperStatus (sw.mib for FOS6.4)

Possible integer values are 1 to 4 meaning online offline testing or faulty.

So it actually decodes just fine if the switch is indeed online.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.