04-03-2013 06:31 AM
Have IBM BCH with Brocade SAN Modules installed in the Chassis. When trying to log into WebTools GUI I get a Java exception error after authenticating and GUI loading process locks at 19%. I have used IEv8, Mozilla 19 with Java 7u17 and Java 6u43 but receive the same error. Could anyone provide a potential solution to this issue?
04-03-2013 11:03 AM
Yes I have executed the "hareboot" command as root on the switch I made changes to and the settings were except for the two (HTTP Attributes and HTTP Restart) were set correctly.
04-03-2013 11:15 AM
I believe we have some confusion
Login as root and then:
HTTP attributes (yes, y, no, n): y set to y or yes
HTTP Restart (yes, y, no, n): y set to y or yes
HTTP enabled (yes, y, no, n): must be set to yes also enable.
ErrorLog Enabled (yes, y, no, n):
AccessLog Enabled (yes, y, no, n):
SSLLog Enabled (yes, y, no, n):
HTTP Port: (1..60000)
Secure HTTP Port: (1..60000)
HTTP IsAlive Check Enabled (yes, y, no, n): must be set to yes
HTTP Max HeapSize: (256..1024)
webtools attributes (yes, y, no, n):
cal attributes (yes, y, no, n):
log as root and try "hareboot"
04-03-2013 11:28 AM
I was logged in as root when I ran the "/fabos/libexec/webdconfigure" command. It would not work otherwise. After that I ran the "hareboot" command and there was no change in accessing the switch through WebTools.