For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

Restart snmpd on Brocade 5100 SAN Switch

Hello

Is it possible to restart the snmp service on a Brocade 5100 SAN Switch without rebooting the switch.

Fabirc OS: v6.3.1.c

Best regards

Stefan

Anonymous
Posts: 0

Re: Restart snmpd on Brocade 5100 SAN Switch

Hi,

hareboot

should work on switch platform. This is non disruptive for the FC traffic.

I hope this helps.

Andreas

Anonymous
Posts: 0

Re: Restart snmpd on Brocade 5100 SAN Switch

Thank you for your answer.

I will make a test on sunday.

Best regards

Stefan

Anonymous
Posts: 0

Re: Restart snmpd on Brocade 5100 SAN Switch

Hello Stefan,

please mark the thread as answered after your test was successfull and if you are happy with the solution.

This will help other community members.

Thanks,

Andreas

Anonymous
Posts: 0

Re: Restart snmpd on Brocade 5100 SAN Switch

Hi Stephan & Andreas

you may try /etc/init.d/snmpd.sh restart (logged in as root)

switch:root> /etc/init.d/snmpd.sh

Usage: /etc/init.d/snmpd.sh {start | stop | restart  <sno> }

It should help to restart snmpd only, not all services like with hareboot

Hope this helps

Kind regards,

--

david

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.