Turn on suggestions
![]() Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
|
11-12-2010 04:47 AM
Hi all,
I have a Brocade 48k (FOS 5.3.1b) functioning as a routing switch between a Brocade fabric and a McData fabric. Unfortunately I can't work out the port-to-port connectivity between the router switch and the McData fabric (there are multiple connections between the switches).
Is there a command I can run at the CLI to determine the port WWN of the McData port connected to an EX-port? All I can find is the WWN of the McData switch.
Alternatively, is there a command I can run to tell me the port WWN the router switch is using to log into the McData? I can see a port WWN in the each of the E-ports on the McData, but I can't work out which port on the Brocade is presenting which WWN forward.
Thanks,
Bryan
11-12-2010 05:41 AM
Bryan.
I'm not sure if i have correct understood you question......
With the command "nsshow" you can list all Link and Device in the fabric.
11-12-2010 05:52 AM
The only connections to the switch are EX ports (4 to Brocade, 8 to McData) so the name server is empty.
The nsshow -t output:
"There is no entry in the Local Name Server"
11-12-2010 10:27 AM
Bryan,
--->>> The only connections to the switch are EX ports (4 to Brocade, 8 to McData)...
are all other Port in the 48k Empty / no connected ?
11-12-2010 12:34 PM
Hi Bryan,
i have find diverse Info, but need a couplea of details.
Is the 48K in Brocade Native Mode or Interop-Mode ?
Can you please post here o/p from switchshow and fosconfig --show command ?
11-18-2010 12:09 AM
Hi Bryan
try fcrfabricshow
Hope this helps
Regards
--
david