12-28-2009 11:22 PM
I have a question about switch IP and CP IP.
1 M48000 can work well without switch IP and CP IP
2 switch IP and CP IP are for management , do I must set up CP IP and switch IP in the same subnet? If not , what will happen
3 I can not find the clear information for switch IP and CP IP from the manual.From my testing , snmp browser can only get snmp information from swicth IP , can not get any information from CP IP.If I set up switch ip and cp ip in the deifferent subnet,for example.
switch ip :188.8.131.52
if cp1 slot is down, then ip(184.108.40.206) is down, can I still get the information of cp0?
Thks for your kindly help.
12-28-2009 11:35 PM
IP Addresses, are not for manamegent only.
CP and Backplane IP must be configured in the same IP Range.
the actually setting are incorrect.
correct must - as example -
SW1 = 220.127.116.11
CP1 = 18.104.22.168
CP2 = 22.214.171.124
In order to delete you test config, see please in the Command Reference Manuals.
12-29-2009 12:27 AM
Thks for your help about my sw ip and cp ip problem.
Ｉwould like to know more technical details about the switch IP and cp IP.
1 "IP Addresses, are not for manamegent only." , what's their real function
2 I am curious to know the reason that I must set switch ip and cp ip in the same subnet.What can happen if I set them in the different IP ?
I can not access CP0 or cp1 from LAN if they are in different subnet .more points?
Thks a lot.