07-30-2012 10:54 AM
C7000 and bl460cs connected to an EMC san via two silkworms. I added a new blade (esxi5.0) and am attempting to connect it to the SAN. When I log into the brocades I do not see the new blades WWN and I am not sure what I need to do to get it to show. The blade is connected via the virtual connect identical to all the other blades but I just don't know what to do. This was setup by someone else and that person has since left and we have no warranty/support on it.
Can someone help me out?
07-30-2012 11:16 AM
you need to log on to the virtual connect, create a new profile for the new server and enable it/assign it to the server.
Then new blade will get wwns assigned and those should be visible on the brocade-switches.
07-30-2012 11:28 AM
It had them assigned already and it already had a port profile... nut the FC SAN NAME was set to 'unassigned.' Once I changed that to EMC1/EMC2 it is now working.
Thanks for your help!