11-13-2009 06:24 AM
I've one Brocade 200E, working withou any problem with FOS 6.0.1a, and i start upgrade to FOS 6.1.0b.
My Brocade have lincense of; Web license, zoning license and fabric license.
After the upgrade i was unable to manage zoning from web tools like i did before in FOS 6.0.1a, the Zoning Admin button was not any more available, only the Switch Admin, Port Admin, Admin Domain.
After debug a litle the problem i've verify the Licenseshow now after upgrade is: (xxxx is the number of license)
The unknow licenses that show now is related to web tools and zoning, the Fabric license shows OK.
I try remove the 2 unknow licenses, and creat again but the same erros is show and i'm unable to manage zoning in web tools.
I downgrade again the FOS to 6.0.1a, and the licenseshow is OK, show thr 3 licences.
Any one have the same problem? anything report in brocade.
11-13-2009 09:48 PM
If you are satisfied with the responses please mark as 'Answered'.
If not, just let me know I can see to get more info.
I would appreciated if you rate the threads.
03-15-2011 06:12 AM
Hi Just a question on the same topic.
I've found myself exactly in the same situation.
The HW is a 200E Branded by IBM (2005-16B)
Starting from Firmware 5.3.0, Updated first to 5.3.32c than to 6.0.0a and finally to 6.1.0a
Now I should continue updating to 6.2.2b but:
1. I've seen the issue about the unknown license and this worried me till i sow this thread.
But actually I cannot see anymore the "Zone Admin"
Is it normal? Shall I enable something?
I've noticed also a difference from the other SAN Switch thad followed the same update flow exept that I've skipped the 5.3.2c fw.
In the "Switch Admin" area, under the "Firmware Download" Tab I have an extra option that allows to downloat the firmware or either the firmware key.
What I've done wrong?
03-15-2011 08:10 AM
Zoning and webtools are in since FOS 6.x native, License is not longer required.
--->>> But actually I cannot see anymore the "Zone Admin"
--->>> Is it normal? Shall I enable something?
yes that's normal, some feature was moved to DCFM and are not longer visible trough the webtools.
you need just to install DCFM ( prof is for free ) to make the Zone visible.