For more details, please see ourCookie Policy.

Fibre Channel (SAN)

New Member
Posts: 1
Registered: ‎03-30-2017

Brocade 300 and 6510 FOS 7.3.1a Vs 8.X



I have a SAN consists of two Brocade 6510 switches and six 300.
I should update the FOS of 6510 from 7.3.1a to 8.x because Brocade does not certify a new storage with version 7, x
The 300 does not support the version 8.x
Can I have problems?


Thank you


Broadcom Moderator
Posts: 415
Registered: ‎08-31-2009

Re: Brocade 300 and 6510 FOS 7.3.1a Vs 8.X



It will be not a problem.

Check the FOS interoperability for Brocade 300 into the 8.x release note. It should be 7.3.1 or later.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.