CA IDMS IUA EIUA

Expand all | Collapse all

Global DMCL New Copy Error

  • 1.  Global DMCL New Copy Error

    Posted 03-28-2012 11:50 PM
    Got this error on a new copy of my global DMCL, has not been regenned since release 16.4 on z/OS 1.13, running 17.1 now. Had to recycle CV's, luckily I have my CV's recycled daily in production. Anyone else seen this?

    [color=#1704c1] V DMCL NC
    Error Auditing/Building the new DMCL. BLDR returned a status of 04. See Log.
    Release Number or OPSYS ID. changed between current DMCL and New DMCL.
    V11 ENTER NEXT TASK CODE: CA IDMS release 17.0 tape GJH01M node TCV1 [color]

    Log message

    [color=#1704c1]11:08 IDMS DB347015 V11 T1 Error detected in DMCL AUDIT routine [color]

    Message:

    [color=#1704c1]DB347015
    <<<<<<<< snip >>>>>>>
    MESSAGE TEXT Error detected in DMCL AUDIT routine

    DEFINITION DB347015 Error detected in DMCL AUDIT routine
    While validating a DMCL VARY NEW COPY an internal
    error was detected in the DMCL AUDIT routine.
    The detailed reason for the error is displayed on the
    terminal.
    COMMENTS Module(s) = IDMSBLDR
    V11 ENTER NEXT TASK CODE: CA IDMS release 17.0 tape GJH01M node TCV1 [color]

    Thanks,
    Steve Harmeson


  • 2.  RE: Global DMCL New Copy Error

    Posted 03-28-2012 11:52 PM
    Hi Steve,

    This is par for the course. I had the same issue going from rel.15 to rel.17. You have to relink the DMCL. Then recycle CV. Then you can relink the DMCL again and vary new copy. The error will go again. This is also true going from rel. 17 to rel. 18 which I am going through the process now.

    John N. Baloga


  • 3.  RE: Global DMCL New Copy Error

    Posted 03-28-2012 11:52 PM
    Thanks John, with add to my plans from here on out, 18.0 is next for me too.

    Steve Harmeson


  • 4.  RE: Global DMCL New Copy Error

    Posted 03-28-2012 11:53 PM
    This happened to me in V17->V18 as well!

    Chris hoelscher


  • 5.  RE: Global DMCL New Copy Error

    Posted 03-28-2012 11:54 PM
    I'm an IDMS newbie. Would anyone have sample JCL to relink the DMCL?

    Mike Barta


  • 6.  RE: Global DMCL New Copy Error

    Posted 03-28-2012 11:55 PM
    Hi Mike, what is your OS and release of IDMS?

    Steve Harmeson


  • 7.  RE: Global DMCL New Copy Error

    Posted 03-29-2012 05:19 PM
    z/os 1.11 and I'm upgrading from v16 sp7 to v17 sp1

    Mike Barta


  • 8.  RE: Global DMCL New Copy Error

    Posted 03-28-2012 11:53 PM
    Yes we had to regenerate all our DMCLs when we went to 17 as the release number changed in the control block. Once we did and cycled all the CVs we had no problem after that with new copies.

    Kirk Miller