Layer7 Access Management

Expand all | Collapse all

How to setup SSL for SPS via GUI

  • 1.  How to setup SSL for SPS via GUI

    Posted 03-11-2014 10:07 PM
      |   view attached

    Hi, Community.

    I was asked how to setup SSL(Embedded Apache Web Server) via SPS GUI so I thought I'd share with you here.

    How to enable SSL via command-line is in the documentation(link below).

    https://support.ca.com/cadocs/0/CA%20SiteMinder%20Secure%20Proxy%20Server%2012%2052-ENU/Bookshelf_Files/HTML/idocs/index.htm?toc.htm?283993.html
     
    The instruction I am attaching to this post is how it is done via SPS GUI. 
     
    Cheers,
     
    Kim
     
     

    Attachment(s)



  • 2.  RE: How to setup SSL for SPS via GUI

    Posted 03-12-2014 09:24 AM

    Thank you Kim!



  • 3.  RE: How to setup SSL for SPS via GUI

    Posted 03-19-2014 02:37 PM
    sunghoon_kim:

    Hi, Community.

    I was asked how to setup SSL(Embedded Apache Web Server) via SPS GUI so I thought I'd share with you here.

    How to enable SSL via command-line is in the documentation(link below).

    https://support.ca.com/cadocs/0/CA%20SiteMinder%20Secure%20Proxy%20Server%2012%2052-ENU/Bookshelf_Files/HTML/idocs/index.htm?toc.htm?283993.html
     
    The instruction I am attaching to this post is how it is done via SPS GUI. 
     
    Cheers,
     
    Kim
     
     


    Thanks for sharing this tip with the community Kim!



  • 4.  RE: How to setup SSL for SPS via GUI

    Posted 03-26-2014 09:15 PM

    Just about to increase hands-on experience with the new version, thank you Kim for the tech note.