How to configure a sms alert with a local gsm-modem?

[furyshots]

Hi,

How to configure a sms alert with a local gsm-modem attached to the Hyperic HQ server?
I am running the latest version of Hyperic HQ. I set some alerts & I added a phone number to the alert user that I made. What files do I need to configure to get this sms service working? I couldn't found anything useful on the support pages.
I hope someone can give me a tutorial on how to do this.

Regards,

[admin]

Hi,

The SMS notification feature uses email addresses to send shorten versions of the notifications that are sent to regular email addresses.

To use the device, you'd need to use a script action (which is only available in the EE version) or use some type of 3rd party/custom gateway system and have the SMS address point to it.

[jzola_hyperic]

this is not adware, example like this:
http://www.bulksms.com/int/w/solutions_email_to_sms.htm

You need to put password into subject. you can easy to do this, edit the email alert template in HQ.

OR
you can build own lowend sms gateway: http://www.gnokii.org/
and create an email2sms script(example postfix or other MTA can do this)

Message was edited by: jzola

[leonasit]

How to configure a sms alert with a local gsm-modem?
To configure an SMS  alert with a local GSM modem, you can follow these general steps:

Connect the modem to your computer: The modem can be connected to a USB port on your computer or through a serial port if it has one.

Install the necessary drivers for the modem: You may need to install drivers for the modem to work properly with your computer. Check the manufacturer's website for more information.

Send SMS using AT commands: You can use AT commands to send SMS through the modem. Some common AT commands for sending SMS are:

AT+CMGF=1 (sets the SMS mode to text)
AT+CMGS="phone number" (sends an SMS to the specified phone number)
Automate the process: You can write a script or a program that automates the process of sending an SMS alert based on certain conditions or events. For example, if your computer's memory usage reaches a certain threshold, you can trigger the script to send an SMS alert.