Host Profile Remediation failing

[VPXA]

Hi All,

Looking forward your help in fixing host profile remediation issues getting below error, while remediating.

Remediation operation could not be started, because no hosts are available for remediation

this host exported from another cluster - Model is not same but from the same family UCS, please provide us your suggestions.

[Rathna V]

Hi,

           If hosts are compliant with Host Profile then there is no hosts are available for remediation, please run check compliance for compliance status. Try running pre-check remediation and check results.

[VPXA]

We are trying to introduce UCS into Hpe host cluster, while configuring the host profile it's not giving any other error except this, to move forward.

Compliance and Pre-Check remediation is passing through - no issues on these any other trouble shooting steps Please.

[Rathna V]

1. Please check are there any messages for generateHostConfigTaskSpec in vpxd log (/var/log/vmware/vpxd/vpxd.log).

2. As change is in the host hardware model, try disable Device alias profile in host profile and run pre-check remediation to see results.          

[VPXA]

Thanks your help in this, could not able to find those entries as you said, please find the below screen dumps.

[Rathna V]

This is the correct Host Profile screen, uncheck "Device Alias configuration" checkbox which is right below "General System Settings" and save host profile. Please run pre-check to understand the configuration changes.

[VPXA]

now some what moving..Profile is remediating but could not able get connected with dVS, 

DVS's not configuring.

[VPXA]

Hi Rathna,

Device Alias Configuration - Disable worked for us, host profiles issues resolved, and can able to see the config changes such as dVS / DataStores are configured properly, thanks for all your help.

Below is the new alarm on host summary any guidance please.

[Rathna V]

This is know issue and tied to host object, this will exists as long as hosts exists in the inventory.

As its an alarm please ignore and continue using the hosts. I did not find any KB article which explain solution, not sure if i can share more details here.

[new_bember]

Hey @VPXA - Try to "Reset Host customizations" and then remediate again.

[RajeevVCP4]

Is EVC enabled if not then enable it then try

------------------------------
Regard
Rajeev
VCIX-DCV, VCF Sr. Consultant
------------------------------