VMware vSphere

 View Only
  • 1.  ESXi on home network

    Posted Jun 21, 2009 06:21 PM

    I installed ESXi on DL380 G3 connected to existi.ng home network and I can connect /manage thru a workstation running windows XP (COMPUTER1) with VI client etc.

    The problem is I am UNABLE to connect/access my COMPUTER1 from COMPUTER2 (using wireless or connected) any other machine n my network which I was able to do before without any issue.

    I want to able to connect to my HOST (ESXI mcahine) from COMPUTER1 and also connect to COMPUTER1 from COMPUTER2 (standard XP mahine)?

    Any comments/feedback would be appreciated!



  • 2.  RE: ESXi on home network

    Posted Jun 21, 2009 11:12 PM

    Additional info.

    My home network has D-LINK router with two computer connected via RJ45 and I also have laptop connected to network via Wireless. My laptop I can/connect browse INTERNET but unable to connect/see shared drive (or can not even PING) my computer1 where VI installed and use to connect to ESxi.



  • 3.  RE: ESXi on home network

    Posted Jun 22, 2009 02:59 AM

    How did you setup the networking when you installed ESXi? Did you use DHCP or configure a static IP address? Can you check your router to make sure that it's leasing an ip address to the host system?



  • 4.  RE: ESXi on home network

    Posted Jun 22, 2009 03:47 AM

    First, many thanks for your response.

    I used the DHCP whe installed/configured the network on esxi.

    This is another problem. using this workstation (XP) I can not login to my ROUTER which is 192.168.0,.1 This w/s has ip address (Ethernet) of 192.168.2.10, subnet mask og 255.255.255.0 and Default gateway of 192.168.2.1, DHCP=192.168.2.1 and DSN=192.168.2.1.

    I can/will use another computer(laptop) connected wireless to check ROUTER config?

    Hope this help to help me?



  • 5.  RE: ESXi on home network

    Posted Jun 22, 2009 03:53 AM

    I could be mistaken about this as I'm certainly no network expert. But if your default gateway is 192.168.2.1, wouldn't that be the IP address of your router?



  • 6.  RE: ESXi on home network

    Posted Jun 22, 2009 04:12 AM

    I guess I found the issue but not sure....

    I have Bell Network DSL MODEM (capable of routing I think etc.) In front of that I have D-LINK 192.168.0.1

    I guess the Bel DSL MODEM is 192.168.2.1 and may be configured for DHCP etc. I never used/setup/configured aware of that until today.. I have to investigate it further. If it is correct some how the ESXi host getting the IP address from my DSL MODEM/router not D-LINK IS it possible?

    Regrads



  • 7.  RE: ESXi on home network

    Posted Jun 22, 2009 06:10 PM

    Yeah it looks like that is what is happening. I don't think I know enough about networking to solve that problem without being there =(



  • 8.  RE: ESXi on home network

    Posted Jun 22, 2009 07:42 PM

    Thanks very much for your responses. I guess I need to configure my Bel Router to DISBALE DHCP and only use D-LINK. Also I found my mistake that one of the wire was going to my BELL router....

    Many thanks for your replies!

    Regards...

    Date: Mon, 22 Jun 2009 11:10:18 -0700

    From: communities-emailer@vmware.com

    To: dooncomputer@sympatico.ca

    Subject: New message: "ESXi on home network"

    ,

    A new message was posted in the thread "ESXi on home network":

    http://communities.vmware.com/message/1291477#1291477

    Author : ChristopherBailey

    Profile : http://communities.vmware.com/people/ChristopherBailey

    Message:



  • 9.  RE: ESXi on home network

    Posted Jun 22, 2009 03:55 AM

    I did check my ROUTER and it does NOT have IP assigned to ESXi HOST? I am not sure how it got the 192.168.2.12 is it from localhost.gateway.2wire.net as it shows up as HOST NAME???

    Here is my setup:

    HomeNetwork: D-LINK 655- Wireless Router

    Router Setting as follow:

    DHCPEnabled

    IP Range Assigned= 192.168.0.100 - 192.168.0.199

    2-Computers running Windows XP connected thru D-LINK router i.e Computer1 (192.168.0.101) & Computer2 (192.168.0.102)

    1-Laptop (Windows XP) connected via Wireless - Computer 3

    ESXi installed on DL380-G3

    2 NIC - Only 1 connected to D-LINK Router

    Network configuration: Use Dynamic IP Address and network configuration

    IP address assigned/given by installation=192.168.2.12

    Computer1 has VI installed and I can connect/manage the HOST (ESXi) thru COMPUTER1 but COMPUTER2 can not access/PING COMPUTER1 neither COMPUTER3 (Connected via Wireless) can see/access COMPUTER1 or HOST (192.168.2.12). I am not too familiar with network setting and any help would be GREATLY APPRECIATED!

    let me know if you have any question and/or require additional info.

    Best Regards.