vCenter version: 7.03 build 20150588
(6) Esxi servers: VMware ESXi, 7.0.3, 20328353
I applied a network driver on all of the six node vsan cluster. Of the six servers four are correct and two are not.
Here is an example of one server with the correct version:
We want the Version to be 218.0.62.0
[root@esx0101:~] esxcli network nic get -n vmnic7
Advertised Auto Negotiation: false
Advertised Link Modes: 1000BaseSR/Full, 10000BaseSR/Full, 25000BaseSR/Full
Auto Negotiation: false
Cable Type: FIBRE
Current Message Level: 0
Driver Info:
Bus Info: 0000:86:00:1
Driver: bnxtnet
Firmware Version: 218.0.219.13 /pkg 21.85.21.91
Version: 218.0.62.0
Link Detected: true
Link Status: Up
Name: vmnic7
PHYAddress: 1
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: FIBRE
Supports Auto Negotiation: false
Supports Pause: true
Supports Wakeon: false
Transceiver: internal
Virtual Address: 00:50:56:52:6f:8d
Wakeon: None
[root@esx0101:~]
We have two servers that look like this note the version, 222.0.155.0
The question is how do we revert to 218.0.62.0?
[root@esx0103:~] esxcli network nic get -n vmnic7
Advertised Auto Negotiation: true
Advertised Link Modes: 1000BaseSR/Full, 10000BaseSR/Full, 25000BaseSR/Full, Auto
Auto Negotiation: true
Cable Type: FIBRE
Current Message Level: 0
Driver Info:
Bus Info: 0000:86:00:1
Driver: bnxtnet
Firmware Version: 218.0.219.13 /pkg 21.85.21.91
Version: 222.0.155.0
Link Detected: true
Link Status: Up
Name: vmnic7
PHYAddress: 1
Pause Autonegotiate: false
Pause RX: true
Pause TX: true
Supported Ports: FIBRE
Supports Auto Negotiation: true
Supports Pause: true
Supports Wakeon: false
Transceiver: internal
Virtual Address: 00:50:56:55:ca:cd
Wakeon: None
Thanks.