For more details, please see ourCookie Policy.


Info & Feedback

Reply
New Member
Posts: 1
Registered: ‎04-03-2019

crt5a2 system error lsi not detected

Hello,

 

My system is not detected anymore the raid controller.

 

The red led is blinking on the card (CRT5a2 Led) 

 

I changed the PCI card location and i did a reset to bios but nothing happened

Super Contributor
Posts: 321
Registered: ‎04-04-2018

Re: crt5a2 system error lsi not detected

Hello,

 

i guess that you are on wrong forum.

Please mark this response as "Accept as Solution" if it answers your question.

Marian Bezeg
Frequent Contributor
Posts: 91
Registered: ‎05-26-2010

Re: crt5a2 system error lsi not detected

CRT5a2 is related to LSI 3ware product.   This is a forum for Brocade SAN fibre channel products and solutions.

I think your question has been posted to the wrong forum.

The comments and advise included are the author's and do not mirror the views and opinions of any company. Any comments, advise, statements or references are without warranty, liability or claims of expertise. You should seek the assistance of the professional entity for subject matter being pursued.
External Moderator
Posts: 5,679
Registered: ‎02-23-2004

Re: crt5a2 system error lsi not detected

@stevendahdah 

@Marian Bezeg 

@dtocci 

 

following the correct answer.

 

LSI bought years ago 3Ware. later If I rememebr correct 2014 ? LSI was acquired by AKA AVAGO today Broadcom Inc.

 

anyway, this Controller is around 10 Years old, and not longer supported neither by AVAGO nor any other Vendor.

TechHelp24
Highlighted
Regular Contributor
Posts: 171
Registered: ‎03-20-2018

Re: crt5a2 system error lsi not detected

Typically, a red LED blinking indicates a device failure.

 

I would recommend reviewing POST startup to see what messages are displayed. Most likely, you will need to replace this card.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.