How can I do to factory reset an sw DS-4700 M?
The procedure is the following:
- Set the switch offline.- At the EFCM Basic Edition interface, select Switch from the Maintenance menu at any view. - Click Reset Configuration and OK to reset the configuration
The IP Address should be changed to the defualt one, 10.1.1.10.
I cant connect to the console port, I need a special configuration cable?
The cable for DS-4700M is the following:
Null modem cable — An asynchronous RS-232 null modem cable is required to configure product network addresses and acquire event log information through the product’s serial port. The cable has nine conductors and DB-9 female connectors.
And the port settings parameters to configure:
• Bits per second—57600• Data bits—8• Parity—None• Stop bits—1• Flow control—Hardware or None