Brocade Fibre Channel Networking Community

Expand all | Collapse all

snmpwalk is giving error No Such Object available on this agent at this OID

  • 1.  snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 11-30-2017 08:43 AM

    Hello Team,

    Snmpwalk is giving  the below error.

     

    /usr/bin/snmpwalk -v 3 -l noAuthNoPriv -u snmpuser1 xx.xx.xx.xx 1.3.6.1.3.94 -O n
    .1.3.6.1.3.94 = No Such Object available on this agent at this OID

     

    This is a IBM-Brocade switch. 

     

    We have many other unit which is working fine,  there are  few devices where we are getting the above error. 

     

    Switch Details:
    switchType: 62.0 (DCX-8 Gb 798-port core fabric backbone)
    Vendor:-IBM-Brocade
    Frimware:v7.4.1d

    snmpConfig --show snmpv3
    SNMP Informs = 0 (OFF)

    SNMPv3 USM configuration:
    User 1 (rw): snmpadmin1
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 2 (rw): snmpadmin2
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 3 (rw): snmpadmin3
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 4 (ro): snmpuser1
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 5 (ro): snmpuser2
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 6 (ro): admin
    Auth Protocol: noAuth
    Priv Protocol: noPriv

    SNMPv3 Trap/Informs configuration:
    Trap Entry 1: 10.237.129.29
    Trap Port: 162
    Trap User: snmpadmin1
    Trap recipient Severity level: 4
    Notify Type: TRAP(1)
    Trap Entry 2: 10.236.138.123
    Trap Port: 162
    Trap User: snmpadmin1
    Trap recipient Severity level: 4
    Notify Type: TRAP(1)
    Trap Entry 3: No trap recipient configured yet
    Notify Type: TRAP(1)
    Trap Entry 4: No trap recipient configured yet
    Notify Type: TRAP(1)
    Trap Entry 5: No trap recipient configured yet
    Notify Type: TRAP(1)
    Trap Entry 6: No trap recipient configured yet
    Notify Type: TRAP(1)


    snmpTraps --show

    # |Mib Name |Supported Traps
    ---|----------------|--------------------------------
    001|SW-MIB |sw-fc-port-scn
    | |sw-ip-v6-change-trap
    | |sw-pmgr-event-trap
    | |sw-event-trap
    | |sw-fabric-reconfig-trap
    | |sw-fabric-segment-trap
    | |sw-state-change-trap
    | |sw-zone-config-change-trap
    | |sw-port-move-trap
    | |sw-brcd-generic-trap
    | |sw-device-status-trap
    002|FICON-MIB |link-rnid-device-registration
    | |link-rnid-device-deregistration
    | |link-lirr-listener-added
    | |link-lirr-listener-removed
    | |link-rlir-failure-incident
    003|FA-MIB |conn-unit-status-change
    | |conn-unit-port-status-change
    | |conn-unit-event-trap
    004|MIB-2 |cold-restart-trap
    | |warm-restart-trap
    005|IF-MIB |if-link-up-trap
    | |if-link-down-trap
    006|RFC1157 |snmp-authetication-trap
    007|HA-MIB |fru-status-change-trap
    | |fru-history-trap
    | |cp-status-change-trap
    008|BD-MIB |bd-trap
    | |bd-clear-trap
    009|MAPS-MIB |maps-trap
    010|T11-FC-ZONE-SERVER-MIB|t11ZsRequestRejectNotify
    | |t11ZsMergeSuccessNotify
    | |t11ZsMergeFailureNotify
    | |t11ZsDefZoneChangeNotify
    | |t11ZsActivateNotify

     


    snmpConfig --show mibCapability
    FE-MIB: YES
    SW-MIB: YES
    FA-MIB: YES
    FICON-MIB: YES
    HA-MIB: YES
    FCIP-MIB: YES
    IF-MIB: YES
    BD-MIB: YES
    BROCADE-MAPS-MIB: YES
    T11-FC-ZONE-SERVER-MIB: NO
    SW-TRAP: YES
    swFCPortScn: YES
    swEventTrap: YES
    DesiredSeverity:None
    swIPv6ChangeTrap: YES
    swPmgrEventTrap: YES
    swFabricReconfigTrap: NO
    swFabricSegmentTrap: NO
    swExtTrap: NO
    swStateChangeTrap: NO
    swPortMoveTrap: NO
    swBrcdGenericTrap: NO
    swDeviceStatusTrap: NO
    swZoneConfigChangeTrap: NO
    FA-TRAP: YES
    connUnitStatusChange: YES
    connUnitEventTrap: YES
    connUnitPortStatusChange: YES
    FICON-TRAP: YES
    linkRNIDDeviceRegistration: YES
    linkRNIDDeviceDeRegistration: YES
    linkLIRRListenerAdded: YES
    linkLIRRListenerRemoved: YES
    linkRLIRFailureIncident: YES
    HA-TRAP: YES
    fruStatusChanged: YES
    cpStatusChanged: YES
    fruHistoryTrap: YES
    IF-TRAP: YES
    linkDown: YES
    linkUp: YES
    BD-TRAP: YES
    bdTrap: YES
    bdClearTrap: YES
    MAPS-TRAP: YES
    mapsTrapAM: YES
    T11-FC-ZONE-SERVER-TRAP: NO
    t11ZsRequestRejectNotify: NO
    t11ZsMergeFailureNotify: NO
    t11ZsMergeSuccessNotify: NO
    t11ZsDefZoneChangeNotify: NO
    t11ZsActivateNotify: NO


    #BrocadeFibreChannelNetworkingCommunity
    #brocade
    #ibm
    #snmp


  • 2.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 11-30-2017 10:52 AM

    Just wanted to add one more point ,

     

    Looks like  am getting this error when I use OID: .1.3.6.1.3.94

     

    The snmpwalk  is responding when I use different OID. 

     

    snmpwalk -v 3 -l noAuthNoPriv -u snmpuser1 xx.xx.xx.xx  1.3.6.1.2.1.1  -O n

    .1.3.6.1.2.1.1.1.0 = STRING: Fibre Channel Switch.

    .1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.1588.2.1.1.62

    .1.3.6.1.2.1.1.3.0 = Timeticks: (131689800) 15 days, 5:48:18.00

    .1.3.6.1.2.1.1.4.0 = STRING: Field Support.

    .1.3.6.1.2.1.1.5.0 = STRING: XXXXX

    .1.3.6.1.2.1.1.6.0 = STRING: End User Premise.

    .1.3.6.1.2.1.1.7.0 = INTEGER: 79

     

     

     

    /usr/bin/snmpwalk -v 3 -l noAuthNoPriv -u snmpuser1 xx.xx.xx.xx 1.3.6.1.4.1.1588.2.1.1.50.2 -O n
    .1.3.6.1.4.1.1588.2.1.1.50.2.1.0 = INTEGER: 0
    .1.3.6.1.4.1.1588.2.1.1.50.2.3.0 = INTEGER: 1
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.1.1 = INTEGER: 1
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2.1 = Hex-STRING: 10 00 00 05 1E 91 D6 00
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3.1 = Hex-STRING: 00
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.4.1 = STRING: "002499"
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.5.1 = STRING: "384"
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.6.1 = STRING: "IBM"
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.7.1 = STRING: "CA"
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.8.1 = STRING: "00000106425G"
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.9.1 = Hex-STRING: 15 FF
    .1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10.1 = Hex-STRING: 20 0A 00


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-03-2017 12:32 AM

    Folks 

     

    Anyone came accross this type of issue ?


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-04-2017 08:03 AM

    It would appear that the MIB reference OID you specified is now depricated in FOS 7.4.x.

     

    From the MIB reference for 7.0.x:

     

    -
    fcmgmt
    -
    connSet
    - uNumber 1.3.6.1.3.94.1.1
    - systemURL 1.3.6.1.3.94.1.2
    + connUnitTable 1.3.6.1.3.94.1.6
    + connUnitRevsTable 1.3.6.1.3.94.1.7
    + connUnitSensorTable 1.3.6.1.3.94.1.8
    + connUnitPortTable 1.3.6.1.3.94.1.10
    + connUnitEventTable 1.3.6.1.3.94.1.11
    + connUnitLinkTable 1.3.6.1.3.94.1.12
    -
    trapReg
    - trapMaxClients 1.3.6.1.3.94.2.1
    - trapClientCount 1.3.6.1.3.94.2.2
    + trapRegTable 1.3.6.1.3.94.2.3
    - revisionNumber 1.3.6.1.3.94.3
    - statSet
    + connUnitPortStatTable 1.3.6.1.3.94.4.5
    - connUnitServiceSet
    + connUnitServiceScalars 1.3.6.1.3.94.5.1
    + connUnitServiceTables 1.3.6.1.3.94.5.2
    ~~~~~~~~~~~~~~~~~~ ad-infinitum
     
    From the MIB reference for 7.4.x:
     
    Search results: 1.3.6.1.3.94
     
    No results found
     
    However, you can go here: www.mibdepot.com, and find the ones you are looking for. If it's important. 
     
     

    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-04-2017 10:29 AM
      |   view attached

     

    Are you sure about that  ?

    We have may switches which is running on FOS 7.4.x which is working  and responding to OID 1.3.6.1.3.94.xx.

     

    Also, please find the attached image, it says  these are supported 

     

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 6.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-04-2017 11:56 AM

    Nope, I'm not sure of anything but death and taxes.

     

    Check the FW version of the switches you are running which support that OID. That reference pic is for 7.4.0, and the version on the switch in question is 7.4.1d. If you find a switch with 7.4.1d and the snmpwalk recognizes that string, then you've possibly added a service/maint package which loads that OID(or group of OIDs). The message from FOS is clear enough: "No Such Object available on this agent at this OID" and it is not an error code, it is an informational message. 


    #BrocadeFibreChannelNetworkingCommunity


  • 7.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-05-2017 09:27 AM

    Doc,

     

    We have many switches which is running on v7.4.1d and  responding to OID 1.3.6.1.3.94. so I dont think the firmware version is not a problem here. 

     

    :(  


    #BrocadeFibreChannelNetworkingCommunity


  • 8.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-05-2017 01:51 PM

    Hello Doc, 

     

    Could you please  explain more about this. 

     

     If you find a switch with 7.4.1d and the snmpwalk recognizes that string, then you've possibly added a service/maint package which loads that OID(or group of OIDs).

     

     

    I can find the switch with runs on 7.4.1 and its responding to the same OID.  Can you  let me know how we can  add a service /mgmt  package that loads the OID. 


    #BrocadeFibreChannelNetworkingCommunity


  • 9.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-06-2017 07:31 AM

    Hi,

     

    do you have virtual fabric enabled on the switch which fails a walk from OID 1.3.6.1.3.94? Do you have ports in the base switch (128)?

     

    If yes, then try the following 

     

    snmpwalk -n "VF:" -v 3 -l noAuthNoPriv -u snmpuser1 xx.xx.xx.xx 1.3.6.1.3.94 -O n


    #BrocadeFibreChannelNetworkingCommunity


  • 10.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-07-2017 08:26 AM

    We dont have the  VF enabled on the failing switches. 

    fosconfig --show
    FC Routing service: disabled
    Virtual Fabric: disabled
    Ethernet Switch Service: disabled


    #BrocadeFibreChannelNetworkingCommunity


  • 11.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-07-2017 10:01 AM

    @Martin.Sjölin

    @Doc Cherwink

    I was comparing the config data,   this is what I found  ofr non-working switches.(Note: these are IBM-Brocade switches) 

     

    Switch 1

    snmp.sysObjectID:1588.2.1.1.62

    snmp.sysObjectID.default:1588.2.1.1.62

    snmp.trapEnterpriseFlag:0

    snmp.trapFilter:0,3;

     

    Switch 

    snmp.sysObjectID:1588.2.1.1.1

    snmp.sysObjectID.default:1588.2.1.1.1

    snmp.trapEnterpriseFlag:0

    snmp.trapFilter:0,3;

     

     

     

    The below  ouputs are from working switches, which responding to OID  1.3.6.1.3.94

     

     


    Working Switch confg details :

    Swich 1 (EMC-Brocade)
    snmp.sysObjectID:1588.2.1.1.1
    snmp.trapEnterpriseFlag:0
    snmp.trapFilter:3,3;

    Switch 2 (IBM- Brocade)
    snmp.sysObjectID:1588.2.1.1.120
    snmp.trapEnterpriseFlag:1
    snmp.trapFilter:3,3;0,3;1,3;

    Switch 3 (IBM- Brocade)
    snmp.sysObjectID:1588.2.1.1.120
    snmp.trapEnterpriseFlag:1
    snmp.trapFilter:3,3;0,3;2,3;

    Switch 4 (EMC- Brocade)
    snmp.sysObjectID:1588.2.1.1.1.62
    snmp.trapEnterpriseFlag:0
    snmp.trapFilter:0,3;

    Switch 5 (IBM- Brocade)
    snmp.sysObjectID:1588.2.1.1.120
    snmp.sysObjectID.default:1588.2.1.1.120
    snmp.trapEnterpriseFlag:1
    snmp.trapFilter:0,3;1,3;


    #BrocadeFibreChannelNetworkingCommunity


  • 12.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-11-2017 07:20 AM

    Can you check  my last update and give some suggestions 

     

    Adding one more point 

     

    I just noticed  from CMCNE 12.4.4. The switches are dicovered and working well. but When I try to pull the historical data for this switch I get the below error message.

     

    "No data points found for selection".  as per  12.0.0 release not this was a bug ( Defect ID:
    DEFECT000420202).  but I dont see  these type of Bug details  on 12.4.4 release notes. 


    #BrocadeFibreChannelNetworkingCommunity


  • 13.  Re: snmpwalk is giving error No Such Object available on this agent at this OID

    Posted 12-18-2017 07:19 AM