Layer7 Privileged Access Management

Expand all | Collapse all

How to Connect to Devices Behind Firewall

Jump to Best Answer
  • 1.  How to Connect to Devices Behind Firewall

    Posted 08-16-2018 12:54 PM

    Dear Team,

     

    We have a use case where we want to connect many endpoint devices which is on the network behind firewall.

    I am looking for some strategy to achieve this and have some questions on below .

     

    1) If we attache additional NIC on PAM

    one will serve internal traffic and another will server traffic for network behind firewall

     

    How the user will be redirected to the device behind firewall ?

    How would be make sure that two networks are still isolated, do we have something to control ?

    We dont want PAM to become router or jump host for two different networks.

     

    Example.

    Lets say we have two devices
    Internal - 10.10.x.x

    External - 212.192.x.x

     

     

    When the user tries to connect 212.192.x.x device from the PAM console, how the user will be routed to the NIC connected with Network behind firewall ?

    When the user tries to connect 10.10.x.x device from the PAM console, how the user will be routed to the NIC connted to Internal network.

     

    Please help..

     

    Thanks



  • 2.  Re: How to Connect to Devices Behind Firewall
    Best Answer

    Posted 08-16-2018 01:09 PM

    Hello Yogesh, You do this by defining additional routes on the Configuration > Network > Additional Routes page. Please also see the online documentation at https://docops.ca.com/ca-privileged-access-manager/3-2/EN/implementing/configure-your-server/configure-network-settings/additional-routes.