DX Infrastructure Manager

Expand all | Collapse all

Using the threshold_migrator combining net_connect

Jump to Best Answer
  • 1.  Using the threshold_migrator combining net_connect

    Posted 04-20-2016 10:07 AM

    We are using net_connect in combination with snmpcollector to monitor the network enviroment of our customers.

    One of our customers the network devices contain a bug the creates a lot of alarms of "Packet Loss is above threshold limit!".


    This alarm will clear itself automatically after a few minutes, but it creates a lot of false positive alarms.


    I have read about the threshold_migrator probe, which can create a time over threshold for net_connect. This would solve the above problem.


    However, when installing and looking at the threshold_migrator probe I have found a few issues.

    First it tells you, you cannot edit the net_connect probe anymore from the infrastructure manager.

    Does this mean you cannot edit the config file as well?

    We have to edit the config file, because we have written a web page the automatically imports devices in snmp_collector and netconnect, and the net_connect probe doesn't have a callback to add a device.


    And it looks like I have to setup the Time over threshold for every device.

    The amount of devices is around 150, do I have to set the configuration for every device manually?


    I was wondering if more people are using the combination of this probes, and how they have setup there environment?

  • 2.  Re: Using the threshold_migrator combining net_connect
    Best Answer

    Posted 05-20-2016 10:27 AM



    So I know that there is a known issue with net_connect and the admin console on remote hubs using tunnels.

    very often the interface will not open and you will get an error.


    As to editing the net_connect.cfg. Yes you can edit it but this will no longer be were the settings are stored for TOT alarms.

    TOT alarms are stored in the local nas alarm_enrichment probe directory in a file called rule_config.xml.


    TOT is all done by the baseline_engine and nas at this point.


    If you are scripting this process I would not see TOT as a good process for you to move to.


    Hope this helps