Don't think you can just print a report of it.
First as Gene mentioned it obtains QoS values which are numeric, not string.
There is the 'Get the Current SNMP Variable Values' button from the toolbar, that might show it.
If it shows up in the log, logmon can be setup to generate an alarm containing it.
From there the nas table NAS_TRANSACTION_LOG can be queried.
------------------------------
Support Engineer
Broadcom
------------------------------
Original Message:
Sent: 05-12-2020 02:59 PM
From: Solomon Melamed
Subject: SNMPGET - Value
I was asked for a report of all the versions of FW, I knew there was a line in the SNMPGET of the FW version I can't remember exactly why I added it,
But it's not clear to me how I can print this report
Original Message:
Sent: 05-12-2020 11:23 AM
From: Gene HOWARD
Subject: SNMPGET - Value
the UIM database for QOS only holds numeric values.
Usually when a string is retrieved as you describe it is only used in the alarm message.
If you have set that up you could check the Nas_transaction_summary table for the string.
Not really clear what you are trying to accomplish.
------------------------------
Gene Howard
Principal Support Engineer
Broadcom
Original Message:
Sent: 05-12-2020 10:39 AM
From: Solomon Melamed
Subject: SNMPGET - Value
Hello All,
I'm Monitoring SW - using PROBE SNMPGET has a one value that is STRING (SW version) Can I retrieve it value from a database?
Many thanks.