Broadcom NetXtreme Gigabit Ethernet (1 port) NIC teaming has been configured on 21 HP Compaq Elite 8300 SFF workstations running Windows 10. Recently we start experiencing some dropouts which is causing lots of grief because the system is now unstable. We have one site that is stable because both NICs (teamed) are connected to one switch rather 2. Other sites both NICs (teamed) are connected to 2 seperate switches to obviously redundency. Below is details fo the NIC:
Broadcom NetXtreme Gigabit EthernetBroadcom CorporationDriver date: 12/09/2013Driver Version: 220.127.116.11Driver Details: c:\windows\system32\drivers\b57nd60a.sys
I have also attached some files and please let me know if I need to send further details.
I assume this is a embedded NIC on MotherBoard, for support you have to open a call by MB vendor
Thank you for getting back to me. The Broadcom NICs are not embedded on Motherboard, the embedded one is a single Intel NIC. The other thing I tried to find the latest drivers for these Broadcom NICs but unfortunately unable to find any driver. Can you please provide me the proper Broadcom support? I am based in Melbourne, Australia and I tried to one of Broadcom distributors and I was advised to contact Singapore. I tried the Singapore number and it is going to someone's voicemail. Why is it difficualt to find any support from Broadcom. Broadcom's website's need to be updated because one of the distributor advise me that they no longer support Broadcom products.
Can you please provide me the link to the latest driver if there is any? Otherwise please provide me a reliable contact number or email address?
Thank you for your help again.
try that one here, nut sure if this is working
Thank you Antonio