I have posted here becuase there is no other section realting to my problem, so hopefully someone will see this and respond.
I have a SAS 9361-16i RAID controller card which at the moment appears to work fine.
My problem is that when i configure a RAID 1 across to SATA enterprise drives and install Windows Server 2016, on the initial boot up after install it blue screens and reports an inaccessible boot device.
The drives are new working drives and the card is new also, but this to me points to a driver issue becuase whilst installing the drivers it did complain briefly but then applied the drivers. The drivers are the latest from the Broadcom website and as far as i am aware the firmware is up to date. Does anyone have any ideas on this? I am starting to pull my hair out as this server needs to be out of the door by the end of the week. Thanks in advance to anyone who can assist.