vSAN 联机运行状况警报"存储控制器上的磁盘使用情况"

[xinan chen]

这个报错是什么问题呢，确认后 过段时间又有

[peter xu]

看起来是vsan skyline health中联机检查的告警

你可以去skyline health中查看具体的告警信息

大概率是兼容性的告警，可以直接忽略，并且勾选静音，就不会再打扰你了。

参考KB： https://knowledge.broadcom.com/external/article/326965/vsan-health-service-vsan-hcl-health-co.html

-------------------------------------------

[TheBobkin]

@xinan chen 

Please note this is an English-language sub-community - please post in English or alternatively post your questions in sub-Community for your native language.

From Google Translate:

vSAN online health alert "Disk usage on storage controller"

 

What is the problem with this error message? It keeps reappearing after a while after I checked it.

 

This may indicate you have misconfigured the local-storage on the nodes with a Passthrough-only HBA controller used but devices configured with RAID (e.g. RAID0, RAID1, RAID5) on the controller:

https://knowledge.broadcom.com/external/article/390739/

 

Would advise the following:

1. Confirm what model of controller using for the vSAN storage devices.

2. If a Passthrough-only HBA is in use then check via iDRAC/iLO whether the storage devices attached to it have RAID configuration on them or are set to Passthrough mode.

3. If incorrectly configured then you will need to rectify this - if the storage devices have a RAID configuration on them but should be Passthrough then unfortunately the vSAN Disk-Groups will need to be evacuated and removed, then the RAID configuration removed and devices presented as Passthrough, then the Disk-Groups recreated.

-------------------------------------------