Looking for Windows7 32 Bit ISO Image for Fusion 4?

[mumek]

Hello

I'll need any working Windows 7 32 bit ISO image for deployment testing. I found this ISO image collection: http://www.heidoc.net/joomla/technology-science/microsoft/14-windows-7-direct-download-links. But until now I didn't find any of the 32 bit (x86) images working with VMware Fusion 4.1.3 (latest).

Has anyone found a working x86 ISO image?

Thx Marko

Suggestion to VMware: Collecting ISO images which are working for VMware Fusion ;-)

[a_p_]

Suggestion to VMware: Collecting ISO images which are working for VMware Fusion ;-)

Well, it's not really VMware's responsibility to provide installation images for Windows. Microsoft offers different subscriptions (e.g. MSDN, Technet) for development which allow you to download all the ISO's from the official download sites.

André

[mumek]

I'll know. But I've really trouble and it's already take an entire day to downloading and checking ISO images. And the collection is a official one but sometimes the installation does not start at all or after couple of minutes there is a missing driver, file, ... .

So currently I'm sligthly pi...d and hoping for any help.

[a_p_]

You may try the Windows 7 - 90-day trial from the Microsoft's Technet Evaluation Center.

http://technet.microsoft.com/en-us/evalcenter/cc442495.aspx

André

[mumek]

Thx. But didn't work. Again an installation error.

[a_p_]

Are you trying to install with "Easy Install" enabled? This sometimes does not work as expected and you may better run the installation without using it.

Btw. please provide some more details about the issue, e.g. error messages, which drivers failed, ...

André

[mumek]

I'm using the normal installation.

I adjust memory to 2 GB, switch off 3D and sometimes I'll reduce disk space to 40 GB. That's it.

I've attachted the error message as screenshot.

[Technogeezer]

Random thoughts:

Have you verified the integrity of your downloaded ISO image (i.e. through a provided file hash)?

How have you configured the virtual CD drive for your VM? Is it configured for the physical CD/DVD drive (which would mean that you burned your ISO to a DVD-ROM) or is it configured to use the ISO image directly?

Sometimes people have had more luck configuring the VMs CD-ROM to directly access the ISO file than to have it read a DVD in a physical drive.

[mumek]

Paul E. Rockwell schrieb:

Random thoughts:

Have you verified the integrity of your downloaded ISO image (i.e. through a provided file hash)?

How have you configured the virtual CD drive for your VM? Is it configured for the physical CD/DVD drive (which would mean that you burned your ISO to a DVD-ROM) or is it configured to use the ISO image directly?

Sometimes people have had more luck configuring the VMs CD-ROM to directly access the ISO file than to have it read a DVD in a physical drive.

1) Verified: No! But I've tried several different ISO images. And the last one is from Microsoft itself.

2) I'm using the ISO image directly. I can't see the point, first burning and then using.

Yesterday I'll found something about 0x80070570 error message on Microsoft community. They say something about memory and suggest to run memtest. I dowloaded memtest86+ from www.memtest.org  and of course the virtual maschines passes all tests :-/.

And also I start tempering with the advanced settings of VMware fusion, no effect.

[Linjo]

This is most likely a bad download, chec filesize and MD5 checksum of the ISO.

// Linjo

[ColoradoMarmot]

Only the last one was from Microsoft?

If these aren't actual ISO's from MSDN or Technet, they won't work, and are likely not legit.  Those should not be discussed in these forums.

Even from MSDN, there can be real issues with ISO's.  Burning and using from the DVD get's around that.

Keep in mind that Microsoft just changed their TOS for MSDN and Technet - those images and licenses are temporary and will expire when your subscription does.  It might be worth just buying a legit, retail version and be done with it.

[mumek]

Only the last one was from Microsoft?

Yes. The other images are from here: http://msft.digitalrivercontent.net/win.

Even from MSDN, there can be real issues with ISO's.  Burning and using from the DVD get's around that.

Ok. I'll try with burning of the Microsoft ISO.

As I wrote I've got a license, but the DVD is defect, so I'll try to find a ISO. One of the x68 ISO image was quite ok. And by the way I only need it for deployment testing.

Thx for your suggestions :-)

[ColoradoMarmot]

You can purchase Windows media without a license from some resellers (and MSFT directly).

[mumek]

Even from MSDN, there can be real issues with ISO's.  Burning and using from the DVD get's around that.

Burning didn't work. Same issue.

[WoodyZ]

mumek wrote:

Even from MSDN, there can be real issues with ISO's.  Burning and using from the DVD get's around that.

Burning didn't work. Same issue.

I'm going to have to disagree with in the following context, any ISO Image that is downloaded from Microsoft (or anywhere else for that matter) and validates against its published MD5/SHA1/etc. checksum should not have have to be burned to Optical Media to be used in a Virtual Machine.  Over the years I have downloaded just about everything available ISO Image on MSDN and all of the major Linux distros and I have never had to burn any ISO Image to Optical Media in order to install it in a Virtual Machine.  As a matter of fact I always create ISO Images the the Optical Media Discs I have and use the ISO Image then, because including the time to make the ISO Image it still installs faster then from Disc.  I maintain a file server that has the images on it and usually install across the network and this too is still faster then directly from Disc.

Okay enough ranting, my question to you is...

1) Verified: No! But I've tried several different ISO images. And the last one is from Microsoft itself.

Have you yet validated the ISO Image against it published checksum?  If you have not then do so, otherwise your wasting everyones time including your own! :smileywink:  Validating the checksum is an Industry Standard Practice and should be done routinely regardless of a reported successful download by whatever method the download was done.  If you don't and you have any issue then it is by all means the absolute first stop on the diagnostic/troubleshooting tree!

Another thing I'd do is use the Apple Hardware Test and test both RAM and Hard Drive on the Host.  Also use Disk Utility to Check/Repair Disk Permissions and uninstall/reinstall VMware Fusion before any further attempts so as to be sure the Host is functioning properly if the checksum validates on the ISO and you continue to have issues.

[ColoradoMarmot]

There was a batch of MSDN ISO's that wouldn't mount and install a year or so back (when I let my membership expire).  The only way I could get them to install in Fusion was to burn them and install from the media.  I was just as surprised as anyone.

[WoodyZ]

See what you get for letting your subscription expire! :smileywink:

Anyway, I certainly do not doubt that you had some issue with MSDN Downloads, with computers anything can happen, I just haven't had any issues with checksum validated ISO images.   However, I too would try burning if I ran into that issue although I suspect the issue mumek is having needs to be looked at by making sure the Host itself doesn't have any issues by doing what I previously suggested and go from there.

[ColoradoMarmot]

Yep, or..just perhaps, they weren't MSFT ISO's.  We've *never* seen that problem here ;-)

[mumek]

Thanks for your help. In the end I solved my issue by getting a DVD from a friend.

The downloaded ISO images didn't have any published checksum, so it was possible to check it anyway. One of the 64bit images did work.

My proposal for other people: Try to get a official DVD. Downloading ISO images doesn't work properly.

Marko

[WoodyZ]

mumek wrote: Downloading ISO images doesn't work properly.

While you may have had difficulties, and rightly so since you were attempting to in essence illegally download ISO Images from Digital River by the link in your OP that you were not entitled to do!, nonetheless there are tens if not hundreds of thousands of us that have downloaded and continue to download ISO Images without any issues or problems and I'm quite sure you're in the minute minority having issues with ISO Images.  So the reality is your comment "Downloading ISO images doesn't work properly." is not true for the majority and therefore almost meaningless! :smileywink:  That is not to say that sometimes ISO Images or any files for that matter, especially very large files, are not corrupted for one reason or another during the download, this can and does certainly happen and one of the reasons MD5/SHA1, etc. checksums are published or Site Specific Download Managers are offered.  The bottom line is regardless of how an ISO Image is downloaded and was reported as successful or no error message displayed, whatever, nonetheless when applicable one should always validate the downloaded file against its published checksum directly before using it.

[AKostur]

How about from Microsoft directly:

http://www.microsoftstore.com/store/msstore/cat/categoryID.44066700?WT.mc_id=MSCOM_HP_US_Nav_BuyWSoftware

[mumek]

I've already a license for Windows 7 x64 professional.