Cd1:\Documentation\Administration Guide Pg number-319 - 328. Its all about location and location specific polcies and how to handle them.
here is aprt of it which you might be looking for otherwise refer to the admin guided pg-319-328
To add a location with a wizard
1 In the console, click Clients.
2 On the Clients page, under View Clients, select the group for which you want
to add one or more locations.
3 On the Policies tab, uncheck Inherit policiesandsettingsfromparentgroup
"group name".
You can add locations only to groups that do not inherit policies from the
parent group.
4 Under Tasks, click Add Location.
5 In the Welcome to the Add Location Wizard panel, click Next.
Managing a group's locations 323
Adding a location with a wizard
6 In the Specify Location Name panel, type a name and description for the new
location, and click Next.
7 In the Specify a Condition panel, select any of the following conditions under
which a client switches from one location to another:
Select this option so that the client can choose this
location if multiple locations are available.
No specific condition
Select this option so that the client can choose this
location if its IP address is included in the specified
range. You must specify both the start IP address and
end IP address.
IP address range
Select this option so that the client can choose this
location if its subnet mask and subnet address are
specified.
Subnet address and subnet
mask
Select this option so that the client can choose this
location if it connects to the specified DNS server.
DNS server
Select this option so that the client can choose this
location if it connects to the specified domain name
and DNS resolve address.
Client can resolve host name
Select this option so that the client can choose this
location if it connects to the specified management
server.
Client can connect to
management server
Select this option so that the client can choose this
location if it connects to the specified type of
networking connection. The client switches to this
location when using any of the following connections:
■ Any networking
■ Dial-up networking
■ Ethernet
■ Wireless
■ Check Point VPN-1
■ Cisco VPN
■ Microsoft PPTP VPN
■ Juniper NetScreen VPN
■ Nortel Contivity VPN
■ SafeNet SoftRemote VPN
■ Aventail SSL VPN
■ Juniper SSL VPN
Network connection type
Managing a group's locations
Adding a location with a wizard
324
8 Click Next.
9 In the Add Location Wizard Complete panel, click Finish.