To configure a client to detect unauthorized devices
1 In the console, click Clients.
2 Under View Clients, select the group that contains the client that you want
to enable as an unmanaged detector.
3 On the Clients tab, right-click the client that you want to enable as an
unmanaged detector, and then click Enable as Unmanaged Detector.
4 To specify one or more devices to exclude from detection by the unmanaged
detector, click Configure Unmanaged Detector.
5 In the Unmanaged Detector Exceptions for client name dialog box, click
Add.
6 In the Add Unmanaged Detector Exception dialog box, click one of the
following options:
■ Exclude detection of an IP address range, and then enter the IP address
range for several devices.
■ Exclude detection of aMACaddress, and then enter the device's MAC
address.
7 Click OK.
8 Click OK.
To display the list of unauthorized devices that the client detects
1 In the console, click Home.
2 On the Home page, in the Security Status section, click More Details.
3 In the Security Status Details dialog box, scroll to the Unknown Device
Failures table.
4 Close the dialog box.
http://www.symantec.com/business/support/index?page=content&id=HOWTO55128
Unmanaged computers
This notification triggers when the management server detects unmanaged computers on the network. The notification provides details including the IP address, the MAC address, and the operating system of each unmanaged computer.