Ok. So lets break it down to figure out where I went wrong.
What I current have in place that is working and was created by default with the install is below.
10.x.x.119:8014
169.254.172.17:8014
192.168.56.1:8014
hostname:8014
hostname.domainname.local:8014
The mngt server list that I created and caused the agents to stop talking to the server was as follows
10.x.x.114:8014
10.x.x.119:8014
169.254.172.17:8014
192.168.56.1:8014
hostname:8014
hostname.domainname.local:8014
Note that I am wanting to change my IP address from 119 to 114. (If interested I'm doing this to move my current DNS server to a different location and make this server the new DNS server. Unfortunately with this environment 300 computers are all statically configured to thier IP address and DNS.)
So as you can see above I created the new mgnt server list exactly as the default list with the exception of the .114 ip address. My reasoning being that I would put the .114 ip address in all the agents policies so that when I did change the server ip to .114 it would be seamless to the agents.
I'm going to do some troubleshooting on my own but if someone can point me in the right direction that would be great too. Thank you.