Enterprise v 2.5

[Migration User]

I'm trying to boot a brand new HP Pro 3000 MT using a ghost book disk made with Win-PE and Win-PE 512 from Enterprise v 2.5
The error i'm getting is;

Status: oxc000000f

Info: The boot selection failed because a required device is inaccessable.

Do i need to upgrade my Ghost software?
Try a differernt version of WinPE?

Is this because i need to load some SATA drivers?

[yogeshsadhu]

Hi,
Its because the required driver (as you mentioned SATA) are missing from the WinPE
Storage and Network drivers are critical for Ghost to boot in to WinPE and to use.

[Migration User]

I figured so much
I got the SATA drivers that came with the pc and added them to the storage drivers section on the winPE but still getting the same error.
I'll try a new/different set of drivers

[Migration User]

The pc says it has an Intel ich10r Sata ahci controller

here is the contents of the inf file that i'm using

; iaAHCI.inf

iaAHCI_ESB2 = "Intel(R) ESB2 SATA AHCI Controller"

iaAHCI_7RDH = "Intel(R) ICH7R/DH SATA AHCI Controller"

iaAHCI_7MMDH = "Intel(R) ICH7M/MDH SATA AHCI Controller"

iaAHCI_8RDHDO = "Intel(R) ICH8R/DH/DO SATA AHCI Controller"

iaAHCI_8MEM = "Intel(R) ICH8M-E/M SATA AHCI Controller"

iaAHCI_9RDODH = "Intel(R) ICH9R/DO/DH SATA AHCI Controller"

iaAHCI_9MEM = "Intel(R) ICH9M-E/M SATA AHCI Controller"

iaAHCI_10DDO = "Intel(R) ICH10D/DO SATA AHCI Controller"

iaAHCI_10R = "Intel(R) ICH10R SATA AHCI Controller"

iaAHCI_PCHM = "Intel(R) PCHM SATA AHCI Controller 4 Port"

iaAHCI_PCHM_1 = "Intel(R) PCHM SATA AHCI Controller 6 Port"

iaAHCI_PCH = "Intel(R) PCH SATA AHCI Controller"

; iaStor.inf

iaStor_ESB2 = "Intel(R) ESB2 SATA RAID Controller"

iaStor_7RDH = "Intel(R) ICH7R/DH SATA RAID Controller"

iaStor_7MDH = "Intel(R) ICH7MDH SATA RAID Controller"

iaStor_8R9R10RDOPCH = "Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller"

iaStor_8ME9MEPCHM = "Intel(R) ICH8M-E/ICH9M-E/PCHM SATA RAID Controller"

So i'm not understanding why its not working.

I have Windows 7
Symantec says i need to let live update bring the program to 2.5.1
Live update doesnt seem to be working all that well.
And how would a different program version make the sata drivers work?