ports for sav clients

[Migration User]

Hi

 

I have few clients which is running with SAV 10.1 series,my firewall is turned on and i cannot off the same.

While deploying the sep package from my 2003 server to the sav clients(migration) what all the ports and other stuff needs to opened to complete the process from the sav client end

 

Help me to fix the issue.

 

[Migration User]

the client machines are windows xp pro sp3 and win 7  32 bits

[w-d]

Here you find the document about ports used by SAV:
Ports used for communication in Symantec AntiVirus 10.x and Symantec Client Security 3.x
http://www.symantec.com/business/support/index?page=content&id=TECH101169

It is enough to open 2967 TCP and 38293 UDP for the communication.

[Migration User]

if i deploy a sep package to those sav clients with the mentioned above port numbers will it get succeeded ??

[w-d]

SEP is a different product and uses different ports (usually TCP 8014 for client-manager communication):

Which Communication Ports does Symantec Endpoint Protection 11.0 use?
http://www.symantec.com/business/support/index?page=content&id=TECH102416

[Rafeeq]

its only the port number which should be of some consideration

check what ports are allowed in the firewall for SAV, use that port as IIS port while installing SEPM. nothing needs to be changed other than that..

[Migration User]

rafeeq

 

i have installed the sepm and 50 % machines are with sep version

 

now my challenge is to migrate the sav to sep,so can i refer this document with regards to opening the ports ??

 

 

http://www.symantec.com/business/support/index?pag...

It is enough to open 2967 TCP and 38293 UDP for the communication.

 

thanks 

vibss

[w-d]

This document describes ports for SAV.

Here you have the documents for ports in SEP:

Which Communication Ports does Symantec Endpoint Protection 11.0 use?
http://www.symantec.com/business/support/index?page=content&id=TECH102416

SEP is not using 38293 UDP. It uses 2967 TCP only for GUPs. In default configuration clients communicate to SEPM on 8014 TCP

[Chetan Savade]

Hi,

Which Communication Ports does Symantec Endpoint Protection 11.0 use?

http://www.symantec.com/business/support/index?page=content&id=TECH102416

[Rafeeq]

you just need to open the communciation port

8014 or 80 , if GUP then 2967 if not just one is enough

[Migration User]

Hi,

       You can also keep  File and Printer Sharing port open in firewall.

Note :

In Firewall under exception tab you can check this option to make it open...