You may encounter spaces errors when applying the CA InterTest and CA SymDump v10 Incremental ONE and TWO fixes.The two PTFS that cause the space errors are RO91970 (increment 1) and RO93124 (increment 2). Both fixes are for FMID (CAVHA01). Please see the resolution below which is outlined in informational solution RI92165. Also listed below are the incremental one and two fixes.
..
..
RI92165
TITLE: VARIOUS STORAGE SHORTAGES WHEN APPLYING RO91970
***** Product Error Alert *****
PTF RO91970 REQUIRES A SIGNIFICANT AMOUNT OF SPACE WHEN PERFORMING THE
SMPE RECEIVE, APPLY AND ACCEPT. IT IS POSSIBLE THAT YOU WILL RECEIVE
SX37-TYPE ABENDS WHEN PERFORMING THESE STEPS. IT IS RECOMMENDED THAT
YOU INCREASE YOUR SPACE ALLOCATIONS FOR THE FOLLOWING DATA SETS TO
AVOID THESE ABENDS:
1) PRODHLQ.AAVHDATV TO SPACE=(TRK,(9250,736,12))
2) PRODHLQ.CAVHDATV TO SPACE=(TRK,(9250,736,12))
3) PRODHLQ.SMPPTS TO SPACE=(CYL,(260,25,750))
4) EXTRACT THE JCL BELOW TO A LOCATION WHERE YOU CAN MODIFY IT.
5) ADD THE CSI DATASET NAME TO THE SMPCSI DD.
6) ADD A JOBCARD THAT MEETS YOUR SYSTEM REQUIREMENTS.
7) CHANGE 'SYSDA' TO A VALID VALUE IF 'SYSDA' IS NOT A VALID DISK
DEVICE NAME ON YOUR SYSTEM.
8) CHANGE THE NAMES OF THE TARGET AND DISTRIBUTION ZONE NAMES IF
YOU DID NOT USE 'CAIT0' AND 'CAID0'.
9) RUN THE FOLLOWING JCL TO INCREASE THE SPACE ALLOCATIONS FOR THE
SYSUT1 DDDEF.
JOBCARD < MODIFY TO MEET YOUR SYSTEM REQUIREMENTS >
//*
//*-------------------------------------------------------------------
//* INCREASE SPACE ON SYSUT1 DDDEF WORK FILE
//*-------------------------------------------------------------------
//DDDEFUPD EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=SHR,DSN=GLOBALHLQ.CSI < MODIFY AS NEEDED >
//SMPCNTL DD *
SET BOUNDARY(GLOBAL).
UCLIN.
REP DDDEF(SYSUT1)
CYL SPACE(100,30) UNIT(SYSDA) NEW DELETE
.
ENDUCL.
SET BOUNDARY(CAIT0).
UCLIN.
REP DDDEF(SYSUT1)
CYL SPACE(100,30) UNIT(SYSDA) NEW DELETE
.
ENDUCL.
SET BOUNDARY(CAID0).
UCLIN.
REP DDDEF(SYSUT1)
CYL SPACE(100,30) UNIT(SYSDA) NEW DELETE
.
ENDUCL.
/*
PTF FMID PRODUCT DESCRIPTION
RO91969 - CAVHA01 INTERTEST/SYMDUMP UI
HYPER: NO
DISTRIBUTION CODE: A (A=Available, I=Internal)
PROBLEM RESOLUTION:
1 EXTRACT THE JCL BELOW TO A LOCATION WHERE YOU CAN MODIFY IT.
2 ADD THE CSI DATASET NAME TO THE SMPCSI DD.
3 ADD A JOBCARD THAT MEETS YOUR SYSTEM REQUIREMENTS.
4 CHANGE 'SYSDA' TO A VALID VALUE IF 'SYSDA' IS NOT A VALID DISK
DEVICE NAME ON YOUR SYSTEM.
5 CHANGE THE NAMES OF THE TARGET AND DISTRIBUTION ZONE NAMES IF
YOU DID NOT USE 'CAIT0' AND 'CAID0'.
6 RUN THIS JCL TO INCREASE THE SPACE ALLOCATIONS FOR THE SYSUT1 DDDEF.
JOBCARD < MODIFY TO MEET YOUR SYSTEM REQUIREMENTS >
//*
//*--------------------------------------------------------------------
//* INCREASE SPACE ON SYSUT1 DDDEF WORK FILE
//*--------------------------------------------------------------------
//DDDEFUPD EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=SHR,DSN=GLOBALHLQ.CSI < MODIFY AS NEEDED >
//SMPCNTL DD *
SET BOUNDARY(GLOBAL).
UCLIN.
REP DDDEF(SYSUT1)
CYL SPACE(100,30) UNIT(SYSDA) NEW DELETE
.
ENDUCL.
SET BOUNDARY(CAIT0).
UCLIN.
REP DDDEF(SYSUT1)
CYL SPACE(100,30) UNIT(SYSDA) NEW DELETE
.
ENDUCL.
SET BOUNDARY(CAID0).
UCLIN.
REP DDDEF(SYSUT1)
CYL SPACE(100,30) UNIT(SYSDA) NEW DELETE
.
ENDUCL.
/*
Note: This Product Error Alert may be updated from time to time with
new information about the problem and its resolution. Please
review this Product Error Alert periodically to determine if
and when it has changed.
..
..
The CA InterTest and CA SymDump v10 Incremental Two PTFs are listed below.
The PTFs are based on the FMIDs you have applied to your CA InterTest and CA SymDump v10 environment.
IF FMID(CABAA00) REQ(RO93118)
IF FMID(CABQA00) REQ(RO93119)
IF FMID(CAMRA00) REQ(RO93120)
IF FMID(CARXA00) REQ(RO93121)
IF FMID(CARXA01) REQ(RO93122)
IF FMID(CAVHA00) REQ(RO93123)
IF FMID(CAVHA01) REQ(RO93124)
IF FMID(CCSAA00) REQ(RO93125)
The CA InterTest and CA SymDump v10 Incremental One PTFs listed below are the PREREQ’S to the Incremental two PTFs.
IF FMID(CABAA00) REQ(RO91965)
IF FMID(CABQA00) REQ(RO91966)
IF FMID(CAMRA00) REQ(RO91967)
IF FMID(CARXA00) REQ(RO91968)
IF FMID(CAVHA00) REQ(RO91969)
IF FMID(CAVHA01) REQ(RO91970)