CA Endevor

Expand all | Collapse all

CA file master plus loading IMS; PSB not available

  • 1.  CA file master plus loading IMS; PSB not available

    Posted 03-30-2017 07:38 AM

    We are getting PSB not available as error msg while loading IMS  using CA file master plus jobs allthough the PBS are available in Environment provided libs. Can any one help on this?



  • 2.  Re: CA file master plus loading IMS; PSB not available

     
    Posted 03-30-2017 08:42 AM

    Hello

    There are a few reasons for this error.

    Can you give me additional pieces of information?

    See my guidelines below.

     

    Thank you

    Patrice

     

    1. Online or batch error?

       a. Online and you get an error message in the top right corner of your screen

          - Is the environment DL/I or BMP?

          - Did you enter a PSB/ACB name?

          - What is the exact message?

          - Press PF1 for the long message

          - Issue the primary command MSGID for the ID of the message

       b. Batch error

          - Copy the SYSPRINT. The SYSPRINT should contain a copy of the SYSIN + various messages 

    2. Additional messages

       a. Online error. Look for additional messages in the JESLOG of the user's TSU

       b. Batch. Look for additional messages in the JESLOG of the batch report

     

    With these pieces of information I might give you directions to find the problem.



  • 3.  Re: CA file master plus loading IMS; PSB not available

    Posted 03-30-2017 10:58 AM

    We are getting below error msg after jcl abend.

    Sysprint details:

    ****2700E RELOAD processing terminated in response to an abend U0428.
    ****2700E The IMS User Abend of 0428 occurs when the PSB is not defined
    ****2700E in the system generation for the IMS BMP region.

    ****2700E Please see the JES Message Log for messages related to the abend.

    ****2741E RELOAD processing terminated
    ****2741I An abend occured while processing command.

     

    SYSMSG details:

    E: 800B09D6 F: 00000000
    END OF SYMPTOM DUMP
    IGD105I SYS17089.T120700.RA000.TDBLD22A.R0389191 DELETED, DDNAME=IMS
    IGD104I IMPD$.CTNPCD.DBDLOA.IMS RETAINED, DDNAME=****#D01
    IGD104I IMPD$.CTNPCD.DBDLOA.IMF1 RETAINED, DDNAME=****#D02
    IEF142I TDBLD22A RELOAD - STEP WAS EXECUTED - COND CODE 0016
    IEF285I SYMPG.CAI.CDBJLOAD KEPT
    IEF285I VOL SER NOS= Z7PP01.



  • 4.  Re: CA file master plus loading IMS; PSB not available

     
    Posted 03-30-2017 11:28 AM

    Hi again Zingy

     

    This IMS abend U0428 generally results from the PSB not being defined in the IMS generation.

     

    If you are using dynamic PSBs you need to add the CA provided names to your IMS definitions and regenerate your IMS.

     

    The new PSBs will only be available after you restart your IMS.

     

    If you were using a static PSB this particular PSB is missing from your IMS definitions and you must regenerate your IMS with this additional PSB definition.

     

    About installing the CA provided PSB definitions see the relevant section in the docops https://docops.ca.com/home manual for the File Master product

     

    PS - I've type C

     

    Regards,

    Patrice



  • 5.  Re: CA file master plus loading IMS; PSB not available

    Posted 03-30-2017 12:24 PM

    Thanks Patric,

    The env file are having the details are below.

    RESLIB1 '***1.NLIMFF1.SDFSRESL'
    RESLIB2 '***1.SCI.NLIMFF1.LOADLIB'
    RESLIB3 'XBPD$.CTNPCD.DYNLOA'
    ACBLIB1 'XMPD$.CTNPCD.ACBLIBA.IMS01'   <---- Hold the correctly holds the PSB .
    ACBLIB2 'XMPD$.CTNPCD.ACBLIBB.IMS01'
    ACBLIB3 'XJ00.SYHIE.IMS##TT1.LOADLIB'
    DOPTACB 'SYMIE.IMSX1##1.FAIMACB'
    DBDLIB1 'XMPD$.CTNPCD.DBDLOA.IMS'
    DBDLIB2 'XMPD$.CTNPCD.DBDLOA.IMF1'
    DBDLIB3

     

    But still it is throwing the error msg. Any suggestions on this.



  • 6.  Re: CA file master plus loading IMS; PSB not available

     
    Posted 03-30-2017 12:30 PM

    Hi Zingy,

     

    I believe the issue is not in your FMIMS setup but in your IMS setup.

    The first thing to do is browse your IMS generation deck and verify the PSB you need is defined in your IMS generation.

     

    Regards,

    Patrice



  • 7.  Re: CA file master plus loading IMS; PSB not available

    Posted 03-30-2017 12:45 PM

    what  I need to say to IMS DBA to do this so that they can get. Can please help?



  • 8.  Re: CA file master plus loading IMS; PSB not available

     
    Posted 03-30-2017 12:56 PM

    Zingy,

     

    Show your IMS DBA or IMS system folks the installation pages for CA FMIMS at /http://docops.ca.com 

    - Go to  http://docops.ca.com  

    - Choose File Master product 10

    - In the left pane click Configuring, then Configuring without CA CSM, then CA FileMaster for IMS tasks

     

    Review the entire section.

     

    The below excerpt is what I meant in my prior updates

     

    Include Dynamic ACBs in the IMS System Definition

    Define dynamic ACBs in your IMS system definition with the DOPT option specified. Member CAWKDACB of cai.

    CDBISAMP contains the sample APPLCTN macros that must be added to your IMS system definition Stage 1 source to support dynamic ACBs.

     

    Follow these steps:

    1. Add the sample APPLCTN macros in member CAWKDACB of CAI.CDBISAMP to your IMS system definition.
    2. Perform an appropriate IMS system definition.

     

    Regards,

    Patrice



  • 9.  Re: CA file master plus loading IMS; PSB not available

    Posted 03-31-2017 04:51 AM

    Hi Patric,

    Can you check on below error msg.

     

    DDNAME EXTRACT opened for DSN=XXXX.CTNDLO.DBXXX.#IMS.EXTRACT.TAPE
    File is NonVSAM LRECL=408,BLKSIZE=32760,RECFM=VB,Mode=PS

     

    RELOAD processing terminated in response to an unexpected
    IMS status code of 'AI' that occurred while performing
    insert in response to Extract Record.

     

    RELOAD processing terminated
    A required database DD statement was missing for the database
    being loaded. The missing DDname is DXXXVS1.

     

    Thanks,

    Rajeev Kumar



  • 10.  Re: CA file master plus loading IMS; PSB not available

     
    Posted 03-31-2017 05:06 AM

    Hello,

     

    The 'AI' code usually means an error on opening the data base. There are various reasons for such a problem. See the IMS message guide for full details and explanation. If your job log contains  a DFS0730I additional message, this message contains an error code and reason code. Check out message DFS0730I in the IMS message manual in order to get a hint on the error.  

     

    If you can't figure out the problem, please open an issue with the support at http://support.ca.com 

    Be prepared to send

    - The full job report

    - A copy of the FMIMS environment

     

    Regards,

    Patrice



  • 11.  Re: CA file master plus loading IMS; PSB not available

    Posted 03-31-2017 05:33 AM

    Many Thanks Patrice  for your quick response. It was big help. And  many thank you for making my work easy .....