CA Automation Point

Expand all | Collapse all

CA Automation Point

  • 1.  CA Automation Point

    Posted 02-20-2015 12:52 PM

    Will CA Automation Point work on Windows 2012?

  • 2.  Re: CA Automation Point

    Posted 02-20-2015 01:04 PM

    Hi Deneen,


    Windows 2012 is only supported by CA Automation Point 11.5 which became Generally Available on December 8, 2014.





    David R. Jones

    CA Technologies

    Principal Product Manager

    System z Mainframe Automation

    Pittsburgh Technology Development Center



  • 3.  Re: CA Automation Point

    Posted 02-20-2015 04:43 PM

    That is what I thought.


    Another question:  Can I upgrade from 11.1 to 11.5?  Do I need to upgrade to another version first?

  • 4.  Re: CA Automation Point

    Posted 02-23-2015 04:21 PM

    Hi Deneen,


    Per software engineering, CA Automation Point does not support upgrading directly from AP 11.1 to AP 11.5.  AP 11.1 is a very old release, so the migration path requires multiple steps.


    • First, upgrade from 11.1 to 11.2
    • Then upgrade from 11.2 to 11.3
    • Finally, can then upgrade from 11.3 to 11.5.

    Given these challenges, it might be easier for you to install AP 11.5 on a clean machine and configure it manually.  Also, make sure you look at the AP 11.5 installation guide to make sure the Windows OS you plan on using is still supported. 




  • 5.  Re: CA Automation Point

    Posted 05-07-2015 01:16 PM

    Will Automation Point 11.1 work on Windows 2003?


    What is the newest version of Windows Automation Point 11.1 will run on?

  • 6.  Re: CA Automation Point

    Posted 05-07-2015 03:03 PM

    Hi Deneen,


    Automation Point r11.1 has not been supported for quite some time, but yes, it will run on Windows 2003