Error on daily after installing new MICS 14.3 in production

[Michel Lavoie]

Hello,

We have installed the new version of MICS 14.3 in one of our environments, and in the daily processing I end up with a code U0999 at step DAY020: . (SEC.CC) HHH:MM:SS <16M >16M >2G <16M >16M
 . DAYALL MICS IKJEFT1B 0000 7763 05.20 00.25 000:00:25 11240K 1764M 4096M 1676K 38M
 . DAY020 MICS MACTL U0999 48503 134.72 01.63 000:04:23 11240K 1764M 4096M 1420K 93M.

The error is at: ERROR: BY variable CPCID is not on input data set MONTHS.HARCRP00.
NOTE: The SAS System stopped processing this step because of errors.

Should I regenerate the members with jclgen.. if yes which member I take and is it complex or unit level.

------------------------------
Michel Lavoie
------------------------------

[Ryan Bonser]

Hi Michel,

I have responded to you outside of this forum regarding this but basically you need to run the retrofit job (RMF7147R) that is provided with RMF7147.  

This retrofit adds summarization key CPCID to the pre-existing HARCRK, HARCRP, HARCRA files. The retrofit job can be found in your 'sharedprefix.PSP.CNTL(RMF7147R) member or by accessing the PSP supplemental jobs panel (MWF;5;2;1;5).

Regards,
Ryan

[Michel Lavoie]

Indeed I have just spoken with Nadine, and she has found the email of March 2022. We are going to apply the RMF7147R retrofit in our environment. Thank you so much.

------------------------------
Michel Lavoie
------------------------------

[Michel Lavoie]

Hello,

I just applied the RMF7147R retrofit but we still have the same error: ERROR: BY variable CPCID is not on input data set MONTHS.HARCRP00.
NOTE: The SAS System stopped processing this step because of errors.

------------------------------
Michel Lavoie
------------------------------

[Alexandru Popa]

Hi Michel,

For issues like this please open tickets with our support organization, this will ensure the promptitude of the support that you will receive, and it allows us to better track this issue.

Regards,
Alex