IDMS

 View Only

  • 1.  S-A00 reason code 0002

    Posted May 20, 2012 07:07 PM
    All:

    We just brought up IDMS under z/OS 1.13 and the IDMS regions won't come up, they abort with S-A00 reason code 0002 immediately (2 Seconds) anybody else run into this?

    William M. Allen, Jr.


  • 2.  RE: S-A00 reason code 0002

    Posted May 20, 2012 07:09 PM
    On support connect there is a TSS problem and solution that speaks to an SA00 should be an S913. It mentions minor code of 2 as well.

    The description speaks of FETCH protection being validated with an empty link stack an ESTAE abends with an SA00 because there is no link stack.

    Not much to is, but you can check out QO54658.

    Is it possible you have a security issue with one of the loadlibs in your STEPLIB?

    What about REFPROT, is it YES or NO?

    Just some thoughts.
    I'm hoping to bring up a release 18 system on 1.13 on Monday or Tuesday this coming week.

    Chuck Hardee


  • 3.  RE: S-A00 reason code 0002 (Solved)

    Posted May 21, 2012 09:41 AM
    All:

    Many thanks to Chuck Hardee for pinpointing our issue, basically we upgraded to z/OS 1.13 over the weekend and with this the SYSPROG also put in a new CAILIB but what he forgot to do was to give everybody read only access to the new CAILIB, so as Chuck pointed out the S-A00 masked what was really a S-913 Security Violation by the IDMS CV attempting to open the CAILIB data set.

    William M. Allen, Jr.


  • 4.  Re: [DBA Issues - Open Forum] RE: S-A00 reason code 0002 (Solved)

    Posted May 24, 2012 02:41 PM
    This is a test.

    Sorry for the bother,
    Laura Rochon
    IUA

    On 21/05/2012 9:40 AM, CA IDMS (IUA EIUA) Global User Community wrote:
    All:

    Many thanks to Chuck Hardee for pinpointing our issue, basically we
    upgraded to z/OS 1.13 over the weekend and with this the SYSPROG also
    put in a new CAILIB but what he forgot to do was to give everybody
    read only access to the new CAILIB, so as Chuck pointed out the *S-A00
    masked what was really a S-913 Security Violation* by the IDMS CV
    attempting to open the CAILIB data set.

    William M. Allen, Jr.
    Posted by:gary.oz
    --
    CA Communities Message Boards
    98144582
    mb.15281481.98142042@myca-email.ca.com
    https://communities.ca.com


  • 5.  RE: S-A00 reason code 0002

    Posted May 21, 2012 09:39 AM
    On my Test sandbox, IDMS comes up with no issues. But I did recompile IDMS Macro Assembler modules. Especially the SVC must be recompiled (via SMPE or manual) depening on how you are set up.

    Edward Timm