DX Infrastructure Management

Configuring XMING:

1. Download and install XMING
2. Run the Application 'XLaunch' to verify the below settings:
   • 
   • 
   • 
   • 
   • Click on Save configuration and Finish to close the Xlaunch Window

Configuring PuTTy:

• Download and run PuTTy
• Under the Host Name, type the Linux/UNIX box hostname or IP Address
• 
• Select Window, set Columns and Rows to 120 and 50 respectively:
• 
• Under Connection, select Data, set Terminal-type string to xterm, set Terminal speeds to 38400, 38400, optionally you could set Auto-login username to avoid entering the username when logging in
• 
• Under SSH, select X11, click the Checkbox to Enable X11 forwarding, set the X display location to localhost:0.0
• 
• To Save the above, click Session and Save
• 

   3. Run the XMING Application

   4. Ensure the XMING Application is seen in the Notification Area

   5. Now, through PuTTy, Load the Session we saved earlier to login to the Linux/UNIX box

   6. To verify PuTTy has been successfully configured, run the command xclock, you should see the clock appear:

For information on how to setup the Linux Machine to install Spectrum, please refer the below technical document:

https://www.ca.com/us/services-support/ca-support/ca-support-online/knowledge-base-articles.TEC1609683.html

For informational video on how to install CABI 6.3 JasperReports on Linux, please refer the below link:

https://communities.ca.com/videos/5034