Issue: After upgrading from 2.3.4 to 2.4 the vendor cert priority list is blank for Interface. The root cause of the issue is that the vendor certification got renamed. To resolve this issue you must run clean_vcp.py. The script is /opt/IMDataAggregator/scripts/clean_vcp.py on the Data Aggregator and is shipped with version 2.4.0 of the product and above. To resolve the issue do the following ...
Procedure:
Run “clean_vcp.py localhost” – this will report whether there is a problem with the vendor certification priority that the script can fix. If the machine’s version of python can’t handle the script, it can be run elsewhere by using the hostname instead of localhost. The output of clean_vcp.py localhost will look something like this if there is a problem ...
Found 24 missing vendor certs:
VCP 62: {http://im.ca.com/certifications/snmp}ExtremeSystemTemperatureMib
VCP 58: {http://im.ca.com/certifications/snmp}ExtremeSystemPowerSupplyMib
VCP 67: {http://im.ca.com/certifications/snmp}CiscoUCSBladeInterfaceAggregateMib
VCP 595857: {http://im.ca.com/certifications/snmp}ClientMCSDataRateCisco
VCP 132: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 129: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 136: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 159: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 414438: {http://im.ca.com/certifications/snmp}MulticastStatisticsCisco
VCP 254: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 317337: {http://im.ca.com/certifications/snmp}AirespaceWirelessMIBbsnAPIfEnt ryAruba
VCP 287: {http://im.ca.com/certifications/snmp}CiscoIPSLAJitterPrecisionMibModif ed
VCP 287: {http://im.ca.com/certifications/snmp}CiscoIPSLAJitterPrecisionMib_2
VCP 319: {http://im.ca.com/certifications/snmp}2014634135_CISCO_SYSTEM_EXT_MIB
VCP 347: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 206221: {http://im.ca.com/certifications/snmp}AirespaceWirelessMIBbsnAPIfEnt ry
VCP 356: {http://im.ca.com/certifications/snmp}IfXTableMibThreshold
VCP 356: {http://im.ca.com/certifications/snmp}IfTableMibThreshold
VCP 356: {http://im.ca.com/certifications/snmp}IntelIfXTableMib
VCP 328117: {http://im.ca.com/certifications/snmp}AirespaceWirelessMIBbsnMobileS tation
VCP 351903: {http://im.ca.com/certifications/snmp}CiscoctpcStatMib
VCP 445: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 435: {http://im.ca.com/certifications/snmp}CiscoRttMonStatsMibModified
VCP 1414: {http://im.ca.com/certifications/snmp}CiscoLwappSiMIBcLSiAqEntry
If the script reports a problem with a vendor certification priority, you can then run “clean_vcp.py localhost -fix”. This should resolve the issue.
Important: This defect WILL occur for all upgrades from any version of 2.3.4 to any version of 2.4. However, if you skip 2.3.4 (and go 2.3.3 -> 2.4.0) then there will be no problem. If you are upgrading from 2.3.4 to any version of 2.4 you should run this script. The engineering team has resolved this defect in 2.5.
This is detailed in knowledge base article: http://www.ca.com/us/support/ca-support-online/product-content/knowledgebase-articles/tec1487303.aspx