DX NetOps

  • Private Community
 View Only
Back to discussions
Expand all | Collapse all

How to correctly model network devices that do not allow neighbor port searching?

  • 1.  How to correctly model network devices that do not allow neighbor port searching?

    Posted Oct 31, 2018 03:56 PM

    We've encountered an instance where one of our sites went down, and the event management didn't work as we would have expected because all of the devices were suppressed.  The Gateway Router doesn't allow neighbor port searching, so apparently it will appear dependent to the other devices.  Is there a way to manually configure this relationship so that we can better monitor the site?

     

     

    Thanks

    Steve



  • 2.  Re: How to correctly model network devices that do not allow neighbor port searching?

    Posted Nov 01, 2018 10:17 AM

    Steve,

     

    From the sound of it, it looks like knowledge document KB000051741 "How to alarm on a model in a Fault Domain when contact is lost to all models in the Fault Domain (Legacy KB ID CNC TS32313 )" may be of what you need.

     

    https://comm.support.ca.com/kb/How-to-alarm-on-a-model-in-a-Fault-Domain-when-contact-is-lost-to-all-models-in-the-Fault-Domain-Legacy-KB-ID-CNC-TS32313/KB000051741

     

    Joe