SPEC 10.2.0.0.245 - Custom mapped attributes higher than 0xfff0009f not shown in tools

[Lothar Mueller]

Hi all,

 

we added a new mib file in MIB-Tools and mapped one new OID to an attribute (0xfff000ab).

 

The attribute is filled correctly and available for the models.

 

Doing a ./show attributes mth=*** shows the new attributes for the model_type_handle

 

0xfff0009f  dnsrestarted                     Octet String      E,R
0xfff000a0  databaserestarted                Octet String      E,R
0xfff000a1  nodeup                           Octet String      E,R
0xfff000ab  lgpFlexibleEntryValue            Text String       E,R,W,[]

 

Unfortunately all attributes greater than 0xfff0009f cannot be selected in Attribute-Editor, Watches, ...

 

Is this a known bug/issue?

 

Thanks for any feedback.

 

Lothar

[Legacy User]

You might be running into the issue seen here.

https://support.ca.com/us/knowledge-base-articles.tec1064765.html

[Lothar Mueller]

As far as I can observe this issue, it seems that the attributes (0xfff000a...) can be used with their names

in Watches-Configuration-GUI either if they are not selectable via Attributes-GUI.