I agree that it is very confusing when you read the documentation!
Here is the DOCOPS link to the probe documentation: (It says NimRecorder replaces WinTask)
https://docops.ca.com/ca-unified-infrastructure-management-probes/ga/en/alphabetical-probe-articles/e2e_appmon-e2e-application-response-monitoring/e2e_appmon-e2e-application-response-monitoring-release-notesWhat is NimRecorder? Where is the video showing it used?
When you try to use it and fail then you open a case with support.
Results of opening a case is a link to more documentation:
https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=33526
This above link mentions the program "
WinTask Capture Wizard" that is clearly documented to have been replaced!
- "
- Last update June 17, 2019
-
The E2E Application Response Monitoring (e2e_appmon) probe executes precompiled NimRecorder scripts and monitors the following parameters:
- Response time of the script execution
- Execution time of scripts
- Availability of client applications
Each transaction executes for a certain time limit and generates the QoS messages from the script.
Note: This probe replaces the old wintask probe."
Searching youtube for video training on NIMRECORD results in zero results.
Searching for training on WinTask returns OLD training on what appears to be NimRecorder:
https://www.youtube.com/watch?v=2ncKQxD3xVM======= Are you confused! Me too! ===========
Wouldn't it be nice if Broadcom took some time to update the documentation and provide some demonstration of how to correctly record and play back a macro?
Just my thoughts on this conversation,
David
------------------------------
Principal Services Consultant
------------------------------
Original Message:
Sent: 07-25-2019 02:37 AM
From: MADANRAJ SIVAGNANAM
Subject: Is that possible to monitor the latency between app and db servers in CA UIM
Hi ,
With the e2e_appmon probe can I get this monitoring of latency between app and db servers achieved ??
Original Message:
Sent: 07-25-2019 02:31 AM
From: Luc Christiaens
Subject: Is that possible to monitor the latency between app and db servers in CA UIM
Please see probe documentation
Original Message:
Sent: 07-25-2019 02:03 AM
From: MADANRAJ SIVAGNANAM
Subject: Is that possible to monitor the latency between app and db servers in CA UIM
Hi Luc ,
Will you please elaborate on this e2e_appmon probe on how to do this monitoring of the latency between app and db servers in CA UIM . Please explain this in the way
Regards
Amar
Original Message:
Sent: 07-23-2019 11:15 AM
From: Luc Christiaens
Subject: Is that possible to monitor the latency between app and db servers in CA UIM
Perhaps could the e2e_appmon probe be the solution?
Original Message:
Sent: 07-23-2019 09:22 AM
From: MADANRAJ SIVAGNANAM
Subject: Is that possible to monitor the latency between app and db servers in CA UIM
But my requirement is to compute the latency between app and db servers and also ICMP is not allowed between CA UIM and servers . So ,now how to do this ? Please let us know .
Original Message:
Sent: 07-23-2019 08:51 AM
From: Luc Christiaens
Subject: Is that possible to monitor the latency between app and db servers in CA UIM
Normally we would use the net_connect probe. This probe will create several QoS metrics and the one you need: QOS_NET_CONNECT_PACKET_LATENCY
Original Message:
Sent: 07-23-2019 08:07 AM
From: MADANRAJ SIVAGNANAM
Subject: Is that possible to monitor the latency between app and db servers in CA UIM
Is that possible to monitor the latency between app and db servers in CA UIM ?
In our environment ICMP is not allowed between CA UIM and servers and so let us know if there is any way to do this monitoring of latency between CA UIM and servers ?
Regards
Amar
9962104689