Qrader Monitoring

[Hong Zhi Lin]

Hello CA expert,

I am trying to monitoring a hardware for Qrader. Is there any probe or other way to monitor the CPU, memory and Diskusage instead of using SNMPTD AND Snmpcollector. 

Because have been trying to load the mib, but is not successful. 


Thanks

[Gene Howard]

There is not dedicated probe for this so you would have to use a more generic probe such as snmpget or snmpcollector.

------------------------------
Gene Howard
Principal Support Engineer
Broadcom
------------------------------

[David Michel]

IBM QRader is not on the supported list for snmpcollector. 
No idea what this hardware is so you can do the work and check for compatibility at:
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/9-0-2/installing/product-compatibility.html

Options are deploying a robot and cdm there or rsp. 
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA.html

------------------------------
Support Engineer
Broadcom
------------------------------

[Hong Zhi Lin]

Thanks David. 
However, we could not deploy a robot as is an appliance.

[Hong Zhi Lin]

Is there any KB stated that the IBM Qrader is not on the supported list?

[Hong Zhi Lin]

So far i can only receive alarms for power supplier from snmpget.

[Franklin Ravi D'souza]

Hi

There is no document specifically which mentions IBM Qtrader is supported or not 

Normally for snmpcollector you can see supported devices in below links and these get updated with every DCD release 

https://devicesupport.broadcom.com/

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/snmpcollector-snmp-data-monitoring/snmpcollector-snmp-data-monitoring-release-notes/update-vendor-certifications.html

->Would suggest raise a certification request for your device to be certified with snmpcollector

Article title: SNMPCOLLECTOR - New Device Certification Request Process

https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=9900

[Hong Zhi Lin]

New Device Certification Request Process will required some time.

I hear that i can upload mine mibs thru snmpcollector without requesting thru CA.