Clarity

  • 1.  Have Modern UX as the default page and npt classic PPM

    Posted 10-28-2021 06:28 AM
    How can I land to modern UX when logging in to the application and not to classic PPM

    ------------------------------
    JP
    ------------------------------


  • 2.  RE: Have Modern UX as the default page and npt classic PPM

    Broadcom Employee
    Posted 10-28-2021 10:31 AM
    Hi JP

    Do you have SAML enabled on your environment? Are you using a load balancer? What is your Clarity version. Thank you -Nika

    ------------------------------
    Nika Hadzhikidi
    Sr Principal Support Engineer
    Broadcom
    ------------------------------



  • 3.  RE: Have Modern UX as the default page and npt classic PPM

    Posted 10-29-2021 02:24 PM
    Same question for us as well.  We are on 15.9.3 using ADFS SAML 2.0 Authentication with no load balancer.  SAML is enabled on our environment and we are On-Prem.

    ------------------------------
    Tim Ewing
    ------------------------------



  • 4.  RE: Have Modern UX as the default page and npt classic PPM

    Broadcom Employee
    Posted 10-29-2021 02:38 PM
    Please check out this KB Set Modern UX as landing page with SAML

    Hope this helps -Nika
    ​​

    ------------------------------
    Nika Hadzhikidi
    Sr Principal Support Engineer
    Broadcom
    ------------------------------



  • 5.  RE: Have Modern UX as the default page and npt classic PPM

    Posted 10-29-2021 04:10 PM
    Just a couple of questions.  See screenshot.

    Questions on NewUX landing page.



  • 6.  RE: Have Modern UX as the default page and npt classic PPM

    Broadcom Employee
    Posted 10-29-2021 06:15 PM
    Hi Tim
    1. SSO URL should be set to the exact URL/pm. It can be http or https depending on what you are using. Use https if that's what you have as SSO URL
    Note: this should normally be enough as change if you don't need to have BOTH links work and you only need Modern UX to be a landing page.

    The below is needed, if you also want users to be able to access classic with a link. Depending on your version you may or may not need it.
    1. Yes web.xml in pm webapp 
    2. Just replace niku/nu with /pm
    3. Filter looks ok to me. After that restart and try again. 

    Note if you are on 15.9.3 or even better 16.0 you may not have to do all this to have both links /pm and niku/nu working. So I do recommend you upgrade. Thank you -Nika



    ------------------------------
    Nika Hadzhikidi
    Sr Principal Support Engineer
    Broadcom
    ------------------------------



  • 7.  RE: Have Modern UX as the default page and npt classic PPM

    Posted 10-29-2021 02:39 AM
    HI,

    Just need to rpalec Niku by pm/#/login at the end of your URL.

    https://<Instance>/pm/#/login

    Regards


  • 8.  RE: Have Modern UX as the default page and npt classic PPM

    Posted 10-29-2021 02:44 AM
    My browser bookmark look like this:
    Classic: https://www.example.com/niku/
    ModernUX: https://www.example.com/pm/#/projects

    If you have the ModernUX enabled and access rights to the tiles page, you'll get automatically to the ModernUX login page with the second url appendix '/pm/#/projects'. If you want to login with the Classic Login Screen and then land on the ModernUX-Page: That I dont know, and I dont know why you would want that :)


  • 9.  RE: Have Modern UX as the default page and npt classic PPM

    Posted 23 days ago

    There is also a kb-article on this topic:

    https://knowledge.broadcom.com/external/article/187769/clarity-how-to-set-modern-ux-as-default.html



    ------------------------------
    [JobTitle]
    [CompanyName]
    [State]
    ------------------------------