Hi Emmanuel,
If you are planning to upgrade NFA, i would recommend to wait for NetOps 20.2.5 - NFA 10.0.5 release.
------------------------------
NetOps Fault (Spectrum) Development Manager
CA Technologies, A Broadcom Company
------------------------------
Original Message:
Sent: 11-06-2020 03:10 PM
From: Carlos A. Radice
Subject: Network FLow Anaylsis and flash end support 2020
Available Today in NetOps 20.2 / NFA 10.0.4:
Currently available NFA (OData but not in the NetOps Portal) API features include:
Refresh for Routers
Enable/Disable Interfaces
Merge Interfaces*
See next release function's in Article Id: 201456 - NFA Flash Pages to NetOps Portal Plan
https://knowledge.broadcom.com/external/article?articleId=201456
Original Message:
Sent: 11-06-2020 02:23 PM
From: Emmanuel ELizondo
Subject: Network FLow Anaylsis and flash end support 2020
Hello
I have installed DX Netops portal and it is now synchronized with NFA but I am not able to find the options in your images to enable/disable interfaces
is there anything I have to configure in PC?
I can't find these options could you please help me to know how can I access them or activate the below options.
thank you.
Original Message:
Sent: 09-24-2020 03:45 PM
From: Carlos A. Radice
Subject: Network FLow Anaylsis and flash end support 2020
You can do this using the CAPC web page:
Original Message:
Sent: 09-24-2020 03:27 PM
From: Emmanuel ELizondo
Subject: Network FLow Anaylsis and flash end support 2020
Hello
I understand now that Netflow reports and graphs can be generated using Netops portal but what about to modify some Netflow parameters like below, those option are still using flash at least in my version 10.0
Allow/disable interfaces
Change NFA applications settings
Watchdog settings
Etc
All these options are flash based too.
Thank you
Emmanuel Elizondo
NETMAN TEAM
m: (+52)181.13265601
emmanuel.elizondo@atos.net
Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and proprietary information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
Original Message:
Sent: 9/24/2020 1:08:00 PM
From: Emmanuel ELizondo
Subject: RE: Network FLow Anaylsis and flash end support 2020
Thank you for the help. I will check that Netops PC installation guide.
Regards
Emmanuel Elizondo
NETMAN TEAM
m: (+52)181.13265601
emmanuel.elizondo@atos.net
Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and proprietary information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
Original Message:
Sent: 9/24/2020 1:00:00 PM
From: Carlos Radice
Subject: RE: Network FLow Anaylsis and flash end support 2020
As Jeffrey informed you just need Performance Center.
See Performance Center Install guide
https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/dx-netops/20-2/Performance-Monitoring-with-DX-Performance-Management/installing/install-performance-center.html
Original Message:
Sent: 09-24-2020 11:02 AM
From: Emmanuel ELizondo
Subject: Network FLow Anaylsis and flash end support 2020
Hello Carlos
Do I need to install all components like Data Agregator, data collector or I only need the Performance center?
Is there any installation guide for this?
Thank you
Emmanuel Elizondo
NETMAN TEAM
m: (+52)181.13265601
emmanuel.elizondo@atos.net
Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and proprietary information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
Original Message:
Sent: 9/24/2020 10:54:00 AM
From: Carlos Radice
Subject: RE: Network FLow Anaylsis and flash end support 2020
Hi Emmanuel,
Is necessary install and use the NetOps Portal
NetOps_Portal_20.2.3_LINUX.TAR.GZ
GEN50000000000411.tar.gz
https://support.broadcom.com/download-center/product-files.html?sku_code=CAIP2099000&release=20.2&gen_level=3
Original Message:
Sent: 09-24-2020 10:30 AM
From: Emmanuel ELizondo
Subject: Network FLow Anaylsis and flash end support 2020
Hello community
We have this scenario where we only have Network flow Analisis tool we don't have CAPM tool.
As you Know NFA tool currently use Flash and at the end of December 2020 flash will be removed from browsers and will not longer have support.
Do you know of any solution or way we can still use NFA tool after December 2020 without have to install CAPM tool.
I already checked with the Support team and they said NFA is still not ready to be "flash free" and the only option is to use CAPM tool to see data.
any ideas?
Thank you.