DX NetOps

 View Only
  • 1.  CA SPM suport for Nexus switches

    Posted Aug 20, 2017 01:38 AM

    Does CA Spectrum module SPM supports IPSLA operations for Nexus switches ?



  • 2.  Re: CA SPM suport for Nexus switches

    Broadcom Employee
    Posted Aug 21, 2017 03:24 AM

    As long as CISCO-RTTMON-MIB is supported on the Nexus device, Spectrum should be able to create/monitor IPSLA tests. You may refer below:

     

    Cisco Nexus 7000 Series NX-OS IP SLAs Configuration Guide, Release 6.x - Configuring IP SLAs UDP Jitter Operations [Cis… 



  • 3.  Re: CA SPM suport for Nexus switches

    Posted Aug 21, 2017 03:56 AM

    Thanks... Network person has configured the IPSLA for ICMP but I can't see the nexus switch in SPM (spectrum) Test folder.

    I was wondering if this is supported by Spectrum or not.



  • 4.  Re: CA SPM suport for Nexus switches

    Broadcom Employee
    Posted Aug 23, 2017 03:27 AM

    Can you test using MIB Tools if you can access the following ciscoRttMonMib against the device?

     

    ciscoRttMonObjects OBJECT IDENTIFIER
    ::= { ciscoRttMonMIB 1 }

    -- 1.3.6.1.4.1.9.9.42.1



  • 5.  Re: CA SPM suport for Nexus switches

    Posted Aug 24, 2017 10:27 AM

    Hello,

     

    If the test was created directly on the device, you will need to have SPM discover the test before it shows up in the "All Tests" search results list.

    (These steps assume you are looking at the SPM folder in the Locater Tab)

    Run the "All Test Hosts" search first.

    Select the Nexus device that has the ICMP test.

    Right-Click and select "Discover Tests"

     

    Once the Test is discovered, you can run the "All Tests" search and see the test model in Spectrum.

     

    Adam