2014 Published Tech docs / Technical tips / Posts to CA Spectrum Community board

[Legacy User]

From: Dempsey, Declan
Sent: 30 December 2014 10:45
Subject: RE: NOVEMBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

1. SNMP Engine Reboot alarm after taking a model out of Maintenance Mode in CA Spectrum
   While in Maintenance Mode, if the device is rebooted, CA Spectrum may assert an SNMP Engine Reboot alarm after the device it taken out of Maintenance Mode.
2. CA Spectrum 9.4.1 - How Top Impacting Outages are calculated
   This will provide an overview of how Spectrum calculates the top impacting outages
3. CA Spectrum 9.4.1 integration with CA Nimsoft now requires the NISAPI probe
   Enhancements to the CA Spectrum/CA Nimsoft integration now require an updated probe on the Nimsoft side.
4. Moving Datacenters to different landscapes for virtual modeling with the CA Spectrum 9.4.1 integration with CA Nimsoft
   The integration models CA Nimsoft hosts to a designated landscape. This allows the Datacenter to be modeled on the same landscape as its upstream devices.
5. VMware objects are not discovered in CA Nimsoft/CA Spectrum 9.4.1 when using the VMware integration
   After enabling the VMware management solution for the CA Nimsoft/CA Spectrum 9.4.1 release, VMware objects are not discovering.
6. CA Spectrum 9.4.1 installation information
   This document outlines installation and migration information for CA Spectrum release 9.4.1.
7. Rare issue in which CA Spectrum 9.4.1 does not populate CA Nimsoft models in the database after enabling the VMware management option.
   After clicking on OK in the confirmation window to enable the VMware management for the CA Nimsoft integration, the synchronization does not happen.
8. CA Spectrum 9.4.1 truncates VMware Datacenter names from CA Nimsoft
   The DataCenter names that contain a dot (.) are truncated in CA Spectrum.
9. CA Spectrum 9.4.1 Device Certification Updates
   This is a list of the device certification updates that have been completed for CA Spectrum 9.4.1.
10. CA Spectrum 9.4.1 virtual modeling integration with CA Nimsoft disables all VHM functionality
    When enabling the CA Spectrum/CA Nimsoft integration with the 'VMware Management' option enabled, OneClick will trigger the deletion of all VHM models across all landscapes before disabling the VHM.
11. CA Spectrum MIBTools hangs when launched
    When launching MIB Tools utility, hangs at message: Loading 2,189 MIBs. Please wait ....
12. CA Spectrum Secure Domain Connector crashes
    CA Spectrum Secure Domain Connector crashes
13. CA Spectrum VMWare Host Pingable models have an initial Model State
    Spectrum VMWare Host Pingable models Model State Initial even though Spectrum is able to contact the IP Address.
14. CA Spectrum install fails on Windows 2012
    CA Spectrum install fails on Windows 2012 with insufficient privileges error message

 

Technical tips / Posts to CA Spectrum Community board:

 

 

Title	Replies	Views
Develop a queue for "Discover Connections"53Under review	2	118
Device family attribute	3	103
Tuesday Tip:  How to enable user event logging	7	1557
Why is NCM disabled for devices in Maintenance?	11	1785
Process Traps during maintenance20New	0	38
Not able to edit Attribute	4	115
TWAMP Support	0	69
Can eHealth or SystemEdge be used to monitor JVM memory consumption	2	80
NCM vlan.dat files Backup from Cisco Devices2New	0	22
Tech Tip : eHealth 6.3.1 - Percentile report for group using CA ehealth Service Level report.pdf	3	181
Spectrum Schedule Duration	1	46
Intergrate Cisco Prime into Spectrum1New	0	59
Flexible Maintenance Mode Schedules38Under review	8	90
Enable Maintenance Mode for all Modeltypes14New	2	66
oc_components for SDM12 integration	2	76
enable live links between switches	26	352
Tech Tip- After upgrading to Spectrum 9.3, are your Infoview reports missing titles?	1	59
Search by IP-Address or Model-Name inside Explorer-Tab, main_Screen44Currently Planned	8	95
Allow Spectrum to deploy Sysedge clients2New	0	59
Spectrum OneClick Log Out Feature5New	1	27
Ability to define default values in policies3New	1	48
see also normal alarms in the navigation window.7New	0	12
Configuration Manager - Cisco SSH - Supported IOS-Versions	3	115
Spec KB: Installation considerations of Spectrum IM Connector	0	30
Bandwidth consumption	3	125
Process monitoring32New	12	201
Distributed Spectrum	5	222
Spectrum NCM	5	173
Change_Spectrum_Hostname.pl	2	70
Spectrum Attribute Cheat-sheet	2	168
Spectrum NCM	0	71
Tech Tip: How to enable the short alarm id in Spectrum OneClick	0	93
IM2.0  Netqos Weathermap14New	1	123
Tech Tip: How to change the hostname and/or IP address of a SpectroSERVER or OneClick server	0	113
Tech Tip: How to capture SNMP packets	0	1749
Customization of Spectrum email Notifications.	18	2692
Merge two DSS into one	5	135
Ability to search through configurations of network devices4New	2	46
NCM policies - add support for if, and, and or within multi-line blocks3New	0	26
Ability to predefine the outgoing/Source IP address of Spectrum9New	0	85
VMWare DRS support5New	0	55
Photos from CA World '14	0	90
Juniper Configuration in Spectrum	3	129
Technical Tip: Can the container alarm rollup in Spectrum be changed to alarm on the entire container model instead of just the upside down triangle?	0	72
CA Spectrum	5	134
SRM Custom Attributes for more model types2New	0	45
Free scripts and instructions for CA Spectrum maintenance scheduler	2	107
SNMPv3 Discovery with Context11New	8	156
Spectrum RESTFul	3	164
CA Spectrum 9.3.H02 hotfix patch released and available for download	0	57
Possibility to log out from the Spectrum OneClick Administration web page16New	0	46
Spectrum detect different ASN connections seperately3New	0	20
Spectrum SOI connector stuck on initializing	3	102
OneClick alarm resync with SpectroServers4New	2	80
Spectrum connector for SOI	3	91
Spectrum: Landscape Display Name / Alias / Friendly Name52New	4	263
Ability to export topology maps in Visio format38Under review	5	144
Spectrum attribute for "Line Changes"	3	115
Change_Spectrum_Hostname_copy_for_tool_downloads_area.pl	0	33
Community Update November 2014 - CA World, Vision and Strategy, Tech Event	0	167
Certification Request	12	232
Sync Spectrum Global Collections of Interfaces to Performance Center2New	0	42
Web view of topology74Under review	7	160
How can we improve your customer experience?	0	79
Shamless Plug for Idea Submissions	0	46
Spectrum Mobile	7	135
Popup message box in front of OneClick9New	0	75
CA Spectrum Mobile App Instructions	3	210
ADVA FSP3000 DWDM in Spectrum	0	45
How can I ensure that every event occurence for a specific event generates an alert?	1	56
Spectrum modeling and topology layout of Cisco Nexus 7000's	1	109
Best practice getting started with CA IM2.0	4	98
July 2014 IM News You Can Use Customer Newsletter	0	63
June 2014 IM News You Can Use Customer Newsletter	1	87
August 2014 IM News You Can Use Customer Newsletter	0	115
September 2014 IM News You Can Use Customer Newsletter	0	80
October 2014 IM News You Can Use Customer Newsletter	0	101
Spectrum Users: If you could have a new video demo, what would it be?	5	182
Technical Tip: What does the Spectrum “SNMP GET_NEXT LOOP DETECTED” alarm mean?	0	75
DMVPN Monitoring in Spectrum 9.42New	2	98
Fibre-to-the-Cabinet (FTTC) Reporting/Alerting	1	71
Top reasons you have thought about leaving CAPC (to go back to whatever you had)	73	2428
SouthBound Gateway files under custom directory5New	7	98
DMVPN monitoring in Spectrum	13	907
CA Spectrum - Cisco Device RAM and Flash information	3	73
Global collection for red hat servers..	2	88
Warning: Missing charsets in String to FontSet conversion	0	54
Unable to discover Devices	3	105
Interfaces Alarms on the Device.	3	756
Archive manger Fails	1	64
Devices stuck in "initial" state	4	92
Enhance Spectrum alarm synchronization process between primary and secondary SpectroSERVERs21New	1	75
Spectrum: Use a different icon for proxy models6New	1	52
CA World 2014 Ops Center Review	0	112
Ability to apply NCM Policy to multiple device families11New	0	64
Stop search from hanging SpectroSERVERs5New	0	58
Upgrading Spectrum	3	103
OneClick CLIENT Application Error	10	260
An idea to make Spectrum installs easier1New	0	39
Anyone been able to successfully install cabi/boxi on linux REL6?  Please share...	11	218
Spectrum on Redhat? Which install?	7	141
November 2014 IM News You Can Use Customer Newsletter	0	60
CA World Spectrum Roadmap Presentation	5	233
Opscenter Keynote from CA World available on YouTube	0	39
Spectrum, destruction of lost models by age does not work in Windows0New	0	48
Spectrum 9.4.1 upgrade Instructions	5	218
Webcast - CA World Recap + IM Product Updates	0	769
November 2014 Webcast - CA World Recap + IM Product Updates	0	136
archive manager not running after Spectrum 9.4.1 upgrade	8	190
STACKED Devices to show all Serial Numbers17Under review	2	99
NTLM/Windows Authentication	3	103
Better documentation for Linux installs1New	0	47
Events showing down after Spectrum 9.4.1 upgrade	6	135
NCM fails to capture configuration	15	615
Spectrum Archive Manager stopped after 9.4.1 upgrade	1	90
OCTOBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board	0	164
Support for Layer 2 Netflow11New	1	67
Allow Spectrum to change all model attributes including Model type     when a model is reconfigured and changes are detected.41Under review	6	224
IM Community Webcast: CA World Recap + IM Product Updates	5	979
Real World example of Spectrum Service Manager	2	94
where can I get SAPwalk	4	105
Spectrum SLA Best Practice	0	68
Monitor non default eventvwr14New	0	48
Spectrum OneClick View	10	245
Spectrum collection based on IOS verison	4	150
wrong model type for Cisco switch	3	97
Better idea for documentation for all this CA IM1New	0	43
CA Spectrum filter on the list view when creating Global Collection	4	111
Enable maintenance mode for a group of devices6New	13	98
IM Tech Tip Rollup - November 2014	0	173
IM Tech Tip Rollup - October 2014	0	81
stop repeated alarms for the same device	2	72
IM Community Webcast (June 16, 2015)	0	75
IM Community Webcast (May 19, 2015)	0	35
IM Community Webcast (Apr 21, 2015)	0	36
IM Community Webcast (March 17, 2015)	0	34
IM Community Webcast (Feb 17, 2015)	0	48
VSAT monitoring through Spectrum	0	39

 

 

 

From: Dempsey, Declan
Sent: 17 November 2014 14:49
Subject: RE: OCTOBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

1. TEC618269
2. TEC618458
3. TEC618463
4. TEC618697
5. TEC618849
6. TEC618862
7. TEC618788
8. TEC618786
9. TEC619044

 

Technical tips / Posts to CA Spectrum Community board:

 

Title	Replies	Views
Best Practice integrate from Spectrum into MS System Center Service Manager	0	40
NCM Policies on Global Collections5New	1	59
Spectrum Mobile	2	50
Spec KB:  Adding columns to OneClick list view	0	42
Include Support for Palo Alto Panorama management device in IM and Spectrum1New	3	34
Free Training: Quick & Easy Fault Isolation in CA Spectrum	6	241
Spec KB:  OneClick server.xml file contains the clear text password for the keystore	0	30
Tech Tip: How to add local IP address and hostname to the local_access_log	0	37
CAWAgenda.csv	0	51
Spec KB:  When attempting to create a report using the Web Intelligence Document and then Spectrum Ad Hoc MySQL EN universe an error: WIJ20002 is received.	0	39
DMVPN monitoring in Spectrum	12	856
Create a Global Attribute that can be inherited by all child attributes in Spectrum0New	0	16
SystemEDGE custom script not working	5	94
Spectrum user preferences	4	58
CA Spectrum	7	788
Spectrum History	7	177
Spec KB:  When using CA Spectrum with CA VCAIM, after a server is discovered with SNMP, the model is moved automatically and prevents movement to another container	0	33
Spectrum Mobile Apps	1	57
Spectrum RESTful WS - Get Alarms by wildcard or substring search	3	116
Important Notice posted : CA20141001-01: Security Notice for Bash Shellshock Vulnerability	0	267
Hi, really need some help with Dynamic Alarm Title	8	162
Incorporate IPAM functionality into Spectrum2New	0	51
Create a custom tab in the contents view of Spectrum4New	1	40
Technical Tip: Did you know you can chat live with a Spectrum Support engineer?	1	72
Import Visio into Spectrum	7	86
IM Community Webcast	0	32
IM Community board meeting	0	25
IM Community board meeting	0	26
IM Community board meeting	0	24
IM Community board meeting	0	33
IM Community board meeting	0	24
IM Community board meeting	0	30
Tuesday Tip: How to configure Backup Location server on OneClick server	3	944
DMVPN Monitoring in Spectrum 9.41New	1	58
Spectrum vs Nimsoft	36	544
Tech Tip: eHealth / Spectrum Integration	0	70
IM Product Surveys: Let your voice be heard!	0	39
Tech Tip:  How to enable debug for Spectrum's telnet daemon (telnetd)	2	49
eHealth trend reporting displaying 100% availability while device was down	6	113
Shellshock Vulnerability – CA Spectrum	6	247
Certification of Extreme Networks S-Series Switch for Spectrum2New	1	38
Supporting NCM on SDC10New	0	39
Make it possible to discover IP NAT IPranges in Spectrum7New	1	12
Additional Enterasys Device Support Required11New	4	28
OneClick Performance Tab poll-interval/time-range9New	3	76
Community Update October 2014 - Free tools, Product Surveys, CA World, Tech Event, Ideas	0	414
Free Perl scripts to create SNMP and Discovery Profiles from Spectrum Global Collections	0	123
Integrated Service Now with Spectrum	9	258
How to customize AlertMap for RFC-trap to be ModelType specific	4	68
No detail events	6	130
SEPTEMBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board	0	216
'Limited' Alarm history in Alarm view	5	73
Enhance Spectrum alarm synchronization process between primary and secondary SpectroSERVERs19New	1	44
text messages	5	68
Remember navigation points	1	38
CA Business Intelligence r3.3 -Question about Updates, TechDocs etc.	1	101
Purging events out of Spectrum Database	5	1726
Solaris Cluster support for CA Spectrum3New	0	33
Installing Spectrum 9.4 on RHEL 6.4 64 bit - Anyone got this to work?	2	88
Make event log in OneClick more usable by allowing scroll back by time interval1New	0	59
IM Community Webcast	0	54
IM Community Webcast	0	22
IM Community Webcast	0	24
IM Community Webcast	0	22
IM Community Webcast	0	29
Is there any known/supported limit of GlobalCollections in a distributed environment ?	4	85
Container Locks for Improving Topology Modeling Consistency11New	0	43
Report Manager Performance Improvement13New	2	70
Spectrum Tech Tips	0	587
Model a Cisco 8500 wireless controller	2	69
Support  NETCONF as an additional Spectrum communication protocol5New	1	25
Adding a syslog daemon to Spectrum & the ability to display this syslog messages in the Spectrum OneClick GUI30New	1	72
Ability to hide links between containers in global collection in Spectrum13New	0	12
Resolve connections to multiple interfaces with same MAC (eliminate rpt_segments/fanouts)13New	0	25
Basic authentication in spectrum0New	1	48
Tech Tip: CA Performance Center (CAPC) Spectrum Integration Discovery functionality details	0	48
SNMP alert from Spectrum	2	56
TECH TIP:How to Enable and Disable SSO on eHealth using CA EEM	0	29
setting up a % change from a guage alarm - spectrum	3	45
Configuring a simple Watch in Spectrum	0	105
Restful - search models in global collection	8	867
NFA alerts to Spectrum Alarms	12	155
Events-Need help	17	224
NCM Support for CISCO ASA/PIX fire walls out of the box6New	0	14
How to access a model's Attributes via Corba?	2	54
Free Online Jumpstart CA Spectrum Training, Next week! October 28	0	62
"Change Password" to write to an external LDAP server12New	5	89
Sending Traps from Spectrum	12	258
Support for Layer 2 Netflow9New	1	22
Multicast Troubleshooting	0	29
ESX 5.5 -Frequent Alerts	4	69
Spectrum Scheduling Maintenance –Different Time Zones4New	0	10
Free Utility:  AlarmNotifier scripts to send SNMP traps	3	104
CA Spectrum And Communities (Kiran Diwaker).pdf	0	44
what’s really happening during the capc synch to spectrum	0	32
More about the IM Community Board Members	0	375
Featured users	0	54
Best method to start CA Spectrum after being powered down for 1 year plus?	6	87
Improvement to Spectrum Network Configuration Manager NCM11New	1	77
Updating CA Spectrum r9.2 H09 License Key	3	129
Deleting Spectrum Data Source	3	93
Spectrum Reports	2	57
Spec KB: DEVICE HAS REBOOTED alarm asserted after taking model out of Maintenance Mode	0	23
Spectrum 9.4 compatible w/ CABI 3.2.0.6?	0	38
Monitor Cell interfaces on Cisco 819 router	0	40
Better support of VMware virtual switches18New	1	37
SPM -Event polling	11	96
wrap text when resizing screen4New	2	20
Sync Spectrum Global Collections of Interfaces to Performance Center1New	0	25
Do you Tweet? Follow @CA_IM on Twitter	1	82
Improvement for Spectrum Secure Domain Connector / NCM10New	1	59
InfoView_User Defined Attributes VALUE	4	146
Create a dashboard in CA Business Object server	2	91
POODLE Security Vulnerability	12	448
creating a watch for date comparison	2	53
Event Disp, IP filter	9	101
Alarms older than...	4	77
Best method for vBlock monitoring	0	45
NHRP Tunnels ,Could Spectrum support them?	3	63
SANM -Maintenace	1	54
Traps(S) habdled locally due to non-responsive remote landscape	4	54
IPRM - Spectrum Integration with Packet Design Route Explorer (REX)	0	46
Spec KB: Unable to launch OneClick Console when using Internet Explorer 10	0	34
Spec KB: When attempting to install a Spectrum Hotfix an error occurs stating that the version of this file is not compatible with the version of Windows you're running	0	26
Service Monitoring through Spectrum	4	764
Spectrum and GIS (Google Map) integration	28	3669
F5 BigIP NCM Script	0	44
No events processed	3	102
Patch Monitor	2	100
VMWare Heart Beat support7New	0	21
Spectrum VM Hostname Attribute	5	64
Spectrum -CAPC	4	90
ifalias in link down message	4	871
Cisco ASR 903 Device Certification2New	2	34
Spectrum - Syslog Server55Under review	9	299
Option to load only topology view information in Spectrum	8	96
Special CA World Guide to Must-See Network Performance Management Sessions	0	40
CISCO IOS XR CERTIFICATION4New	0	12
Info view Dashboard	4	105
Cisco CPT600 Device Certification1New	0	21
Support for Cisco ASR 90106New	1	23
OneClick - Performance - Recording45Under review	1	116
Customized "New Alarm Sound" in spectrum	1	59
Spectrum / CA PC bandwidth weather map Display ?	5	100
Web based Spectrum28New	10	284
Modellinggateway via Webservice35Under review	8	55
Differntiate physical and virtual links within Topology Map63Under review	2	90
Allow to set a maintenance starting now with only end-time35Under review	8	128
Graphical SNMPv3 privacy configuration5New	0	69
Secondary SS Status @ Connection Status - Console30New	1	96
Spectrum NCM wish list4New	1	48
Allow Spectrum to change all model attributes including Model type     when a model is reconfigured and changes are detected.39Under review	5	149
"Ignore Case" Checkbox in Event Condition3New	0	9
Option to generate an alarm when a watch is unreadable11New	3	78
Spec KB: SOI Alerts are published with Alert Title "Error formatting event java.lang.NullPointerException" and Summary "Error getting probable cause text for <event type>"	0	15
Spec KB: The oc_component.exe failed to start on Windows 2008 64-bit	0	18
Duplicate Alarms from LiveHealth	7	102
End date and time in Maintenance Schedule2New	0	10
Alarm List	6	139
Spectrum_alarms_9.2.1.txt	0	50
Remove a scheduled maintenance once run8New	3	66
"device has rebooted" on a server monitored by Spectrum	2	85
Microsoft Internet Explorer 11 Support24Delivered	8	182
Add a notes field for maintenance mode82Currently Planned	9	145
VMware Host maintenance mode37Currently Planned	12	61
Spectrum via ehealth report	5	130
Cisco environment monitoring Information	29	298

 

 

From: Dempsey, Declan
Sent: 13 October 2014 13:24
Subject: SEPTEMBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

1. TEC616348
2. TEC616352
3. TEC616369
4. TEC605395
5. TEC616447
6. TEC616446
7. TEC616803
8. TEC617896
9. TEC617895
10. TEC617894
11. TEC617903
12. TEC617956
13. TEC617961
14. TEC617967
15. TEC617966

 

Technical tips / Posts to CA Spectrum Community board:

 

Title	Replies	Views
CAPC should have same device names as Spectrum1New	0	30
display ehealth poller name in Livehealth alarm in Spectrum8Not planned	1	31
WAN link terminated as Ethernet interface not showing Link status is Spectrum & ehealth9New	1	26
Spec KB:  JSPs and Servlets vulnerability in Cabi 3.3	0	32
NCM - passing TFTP address in an SSH script	4	283
NCM fails to capture configuration	14	437
How do I stop Spectrum incorrectly reporting "device has rebooted" 0x10ff0 after it's asserted an interface reconfiguration event 0x1001d?	0	31
new knowledge document - TEC606230	0	33
new knowledge doc - TEC606259	0	31
Spectrum test environment.	3	65
Company Logo in CA Spectrum One click	15	752
Container Locks for Improving Topology Modeling Consistency10New	0	34
Adding a syslog daemon to Spectrum & the ability to display this syslog messages in the Spectrum OneClick GUI30New	0	44
spectrum CABI installation	2	48
Spectrum support for vPC - need SNMP MIB walk	2	54
How to integrate Spectrum with BMC Remedy directly	4	88
Option to generate an alarm when a watch is unreadable1New	0	26
Model Palo Alto firewalls with snmpv3	0	34
What do you call CA Spectrum?	0	53
trapexploder.cf filtering not taking effect after restart	2	43
Possibility to log out from the Spectrum OneClick Administration web page13New	0	15
NCM possibility to add devices to CA Device Families16New	0	22
eventdisp rule	2	55
PortChannel Monitoring	4	77
Update Certification Web Database Search with Spectrum/eHealth version, FW Level and Model # of Device8New	1	38
Import the discovery configuration	3	47
How to give access for multiple user for Oneclick Application	2	34
Webcast - Spectrum 9.4 Key Features & Demo / PM2.0 REST API	0	94
Webcast - IM Product Group Vision and Strategy Review	0	256
Monitor virtual machines	1	62
How to limit the locator display	0	32
Graphical SNMPv3 privacy configuration1New	0	32
ESX 5.5 -Frequent Alerts	3	58
Free Training: Building Customized Role Privileges w/ CA Spectrum	0	90
Spectrum Attribute Dictionary	11	130
AUGUST Published Tecdocs / Technical tips / Posts to CA Spectrum Community board	0	111
JULY Published Tecdocs / Technical tips / Posts to CA Spectrum Community board	0	55
Tech Tip: Which versions of ehealth are compatible with Spectrum 9.3 and 9.4?	0	34
SSDB Restoration	8	94
controlling alarms in Spectrum	3	71
Spectrum managing Juniper kit	0	25
CA Spectrum R9.2(.3) migration/upgrade to CA Spectrum R9.3 without monitoring downtime	0	60
Where can I find examples of SPM custom monitor	0	44
If you're new to CA Spectrum, or are considering network monitors, Join this webcast	0	67
Segment SpectroSERVERs by Main Location Server	6	1326
Certificacion de equipo Hikvision (DVR) DS-9016HFI-ST0New	0	30
Spectrum 9.3 - H02 - Release Date	4	213
Spectrum RESTful WS - get alarms filtered by landscape and alarm type	4	1848
SPECTRUM CABI-Installation Error	1	33
Spectrum - Syslog Server54Under review	9	253
Tech Tip: How to check the total number of traps that have been received by a device since the last SpectroSERVER restart	1	61
Option to run one script for multiple alarms using Right-click option in Spectrum OneClick	1	43
Correct title for System Up Time field in Spectrum OneClick6New	4	38
CA World '14 session catalog available	1	69
Tech Tip: Performance Center Data Source Compatibility Matrix	0	112
CA Spectrum - Distributed alarm filter3New	1	61
CA User Communities29Delivered	2	75
OSPF events/alarms not generated in Spectrum	6	76
CABI upgarde	0	36
We´re requesting messages that allow a fall monitor server. What calls are those that posts critical monitoring tools0New	0	33
Filter in Interface-Tab-View in OneClick10New	1	29
Undo Button in Spectrum Topology View34New	9	112
Devices stuck in "initial" state	2	52
Integrating CA Spectrum and CA Nimsoft Monitor	0	54
CA Spectrum - LACP	0	29
Community Update September 2014 - Product Strategy, CA World & Tech Event	2	247
Enhancement Request - Schedule IP Address Changes8Delivered	2	27
ZFS support for SysEDGE4Delivered	2	22
Ideas management enhancement37Currently Planned	5	222
Certificacion de equipo Fortigate0New	0	35
IMPROVE RESILIENCE OF SPECTRUM NCM CAPTURES3New	0	78
Web view of topology71Under review	7	113
Model a SNMPv3 device in Spectrum	11	102
NCM generic SNMP commands6New	0	22
Don't delete nsTunnelIF models with same ip address pair9New	0	11
automatically sync Event Config files between Spectroserver host and OneClick host22Under review	15	114
Develop a queue for "Discover Connections"48Under review	2	75
Best Practices - Spectrum	2	91
Getting Management agent lost Alarm frequently	10	132
Spectrum Users: If you could have a new video demo, what would it be?	2	105
Spectrum Service Manager	7	117
Moving Spectrum SSDB?	1	37
Spectrum RESTFul	0	47
SRM Maintenance	4	77
Instability after upgrading to Spectrum 9.4 from 9.3	2	93
PTF Installation Routine11New	0	96
Configuration Manager - Unable to write to archive	2	181
Export device list	1	41
Is there a Spectrum integration for Dell OpenManage?	1	52
Spectrum trap mapping	0	77
Using Spectrum Service Manager for availability monitoring	0	74
Spec KB:  How to make Date type dimension filtering by time in Query Filter of WEBI report	0	23
Spec KB:  CABI installation fail with Unable to find installed locale	0	26
Spectrum notifications	4	65
Spectrum X64 app36Currently Planned	19	232
Process monitoring30New	12	158
Differntiate physical and virtual links within Topology Map54Under review	0	44
is possible to generate alerts(spectrum) when an interface discovered in NFA is found flow off?	1	47
Port congestion alert	4	61
Multicast Manager CA Spectrum support CISCO-MVPN-MIB5New	1	27
CA Opscenter will feature IM related products at CA World - Here's the Program Guide	0	66
Spec KB:  Spectrum 9.3 H01 install fails with "Unsupported upgrade path" error	0	43
Spec KB:  Preventing IP Redundancy Preferred Addresses from being deleted from the RPA table	0	24
Spec KB:  Events from the Nimsoft integration are not mapping to the expected models in Spectrum.	0	28
Config Capture is extremely slow	0	13
Device Family Help (Local Override)	0	17
Show File URIs as Link in Spectrum OneClick2New	0	38
FILE URIs in Spectrum OneClick	3	52
oc_components for SDM12 integration	0	20
Edit SetScript	3	41
Merge two DSS into one	4	86
Better support of VMware virtual switches17New	1	25
Combine VMware ESX Host model with SNMP Model21New	1	36
SPM HTTP Tests work on some URLS but timeout on others.	0	34
SPM Custom test script	5	81
CA World Speaker returns - Dave Moser, Jr. of BCBST to present his case study of integrating CA Nimsoft Monitor with CA Spectrum	0	41
CA World 2013 Presentation BCBST Dave Moser	0	30
Spectrum Tech Tips	0	389
Free IM tools and scripts	0	177
hp_procurve_capture_config.txt	2	164
IM Community WIKI Front Page	0	538
Free tool downloads now available!	2	216
Microsoft Internet Explorer 11 Support24Currently Planned	5	130
SouthBound Gateway files under custom directory5New	5	51
Creating Filter In Global collection1New	1	23
Improvement for Spectrum Network Configuration Manager7New	0	43
Web based Spectrum26New	10	261
Spectrum Archive Manager enhancement13New	0	80
Spectrum re-enable statistical polling6New	6	58
Create Nested Alarms in Spectrum	7	100
Zebra/Quagga BGP traps	1	1403

 

 

 

 

 

From: Dempsey, Declan
Sent: 15 September 2014 13:24
Subject: RE: AUGUST Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

1. The document [ Conceptual information regarding the Discard Rate value in the interface performance view in CA Spectrum OneClick ] has been published as TEC615511
2. The document [ Global Collections are missing after upgrading to Hotfix H01 for CA Spectrum 9.3 (Spectrum 09.03.00.H01) ] has been published as TEC615509
3. The document [ Error when processing OSPF-5-ADJCHG syslog in Spectrum - "Does not match the format defined in the Parse Map file OSPF-5-ADJCHG"  ] has been published as TEC615510
4. The document [ Information on how to obtain the CA Spectrum 9.4 download from the CA Support website ] has been published as TEC615579
5. The document [ Cleared alarms are still showing in Spectrum OneClick ] has been published as TEC615640
6. The document [ Ad-hoc Report fails with: Cannot initialize Report Engine server. (Error: RWI 00226) (Error: INF) ] has been published as TEC615641
7. The document [ Customized CA Spectrum OneClick Menu does not execute actions after installing CA Spectrum 9.4 ] has been published as TEC615642
8. The document [ Information on CA Spectrum 64bit Java (JRE) Client Support for OneClick clients ] has been published as TEC615643
9. The document [ The CA Spectrum SpectroSERVER (SS) may crash with "Out of Memory" error when running RESTFul query with a large input stream ] has been published as TEC615644
10. The document [ Spectrum Performance Manager (SPM) HTTPS Tests Can Not Be Created ] has been published as TEC615645
11. The document [ How to prevent CA Spectrum OneClick from seeing specific alarm types ] has been published as TEC615750
12. The document [ Black Pipes in Global Collections between device model and container model in CA Spectrum OneClick ] has been published as TEC615755
13. The document [ How to pass hostname to alarm title for  a BGP trap ] has been published as TEC616180
14. The document [ Error messages “No Associated Text” and "….no event format file exists.” seen in the NOTIFIER.OUT ] has been published as TEC616182
15. The document [ Limit VHM modeling within CA Spectrum to particular virtual machines and ESX hosts. ] has been published as TEC615754

 

Technical tips / Posts to CA Spectrum Community board:

 

Title	Replies	Views
Search by IP-Address or Model-Name inside Explorer-Tab, main_Screen40New	3	28
Alarming	3	291
Add Device Connected Column to Global Collection List View	3	377
Customization -Info View	0	13
JUNE Published Tecdocs / Technical tips / Posts to CA Spectrum Community board	0	40
MAY Published Tecdocs / Technical tips / Posts to CA Spectrum Community board	0	20
April Published Tecdocs / Technical tips / Posts to CA Spectrum Community board	0	21
Tuesday Tip: Is it possible to use the attribute WA_Link when creating custom SRM Ad Hoc Reports	0	8
Spectrum OneClick Topology View Visio-like Layout Options2New	0	23
RESTFul Operators	0	16
High Availabilty Approaches IM2	2	31
Question On Use of Heartbeat Event in Spectrum	1	30
eHealth bandwidth utilization reports	3	51
Tuesday Tip: Step by Step Upgrade from CABI 3.2 to CABI 3.3 on Windows	10	2229
Geographical Hierarchy Best Practices in OneClick	2	50
A blog post worth reading	0	27
Need help modeling a Fujitsu M10 server.	1	16
Spec9.4 Nimsoft Integration	10	124
Alt MLS and secondary Spectro at remote site?	5	31
Is the MLS is a proxy?	2	23
Device Certification8New	2	32
Spectrum KB: Error code RCIRAS0546 when trying to export Spectrum Report Manager (SRM) reports to PDF format	0	22
Spectrum KB: Nexus 5548 chassis models discovered as GnSNMPDev in Spectrum OneClick in versions prior to Spectrum 9.2.3	0	21
Spectrum KB: SRM database migration from 9.1 to 9.2 fails with errors in import_remote_reporting_data.results	0	8
OneClick	0	117
Como puedo integrar Automation Pount con Spectrum	0	7
OneClick Power Net UPS customization files	2	31
Events -Frequent	2	41
Deleting EventAdmin to get rid of Eventmodels	0	22
Network Configuration Manager (NCM)	0	79
Event Processing	0	147
How to include/install modeling gateway toolkit on OneClick 9.2.1?	2	17
VMware hardware failure for Spectrum corrupts the SSDB and DDMDB.	0	34
Allow to set a maintenance starting now with only end-time27New	5	75
Multiple EventModels from an EventAdmin	4	66
Web link to a model	7	1224
Free Training23Delivered	5	301
How to automate the updating of the NCM local communication configurations	0	108
Menu filter to be based on if an attribute not empty	3	61
Auto ping and poll	8	88
Spectrum Alerts	1	49
How to install/include modeling gateway toolkit on Oneclick 9.2.1?	1	15
Unable to launch Spectrum console after upgrading to 9.4	2	56
Spectrum Performance Manager (SPM)	0	68
Spectrum Report Manager (SRM)	2	109
SRM Schema	0	32
Policy Manager	0	46
Process monitoring27New	12	127
What does Spectrum LDAP use for security.	2	53
EXPORT TOPO VIEW BY ContainerID/Name or GlobalCollectionID/NAME using WEBAPI0New	0	20
I have a VNM alarm that will not clear !!!	1	25
How to execute a (perl) script against a device model?	1	26
Spec KB: Ad-hoc Report fails with: Cannot initialize Report Engine server. (Error: RWI 00226) (Error: INF)	0	38
Community Update July 2014	0	309
Community Update June 2014	0	155
Spectrum :: Host configuration tab in spectrum	4	81
Log file monitoring	8	153
CA Spectrum® r9.4.0 is now available for download	5	619
Ideas management enhancement36New	4	178
How do you monitor LDAP with CA Infrastructure Mangement Tools?	4	62
NCM - Firmware Repository2New	0	35
June IM News You Can Use Customer Newsletter	1	72
CA Spectrum featured in the customer IM Newsletter	0	49
July IM News You Can Use Customer Newsletter	0	34
How to sync the modeling catalog	2	84
Spectrum -> NetCool Integration - Required ports	0	27
Do you use CAC authentication with CA products such as eHealth?	0	24
Not Getting Proper Event Model Name	1	46
Deleted Models Remain in OneClick	3	52
event.ibd	8	90
Spectrum KB: Which CABI version should be installed?	3	494
Scheduled Reports in CABI	0	16
August IM News You Can Use Customer Newsletter	0	70
OneCLick Customization - OID Instance	1	57
Config Capture of Cisco Switch Via SSH(Perl Script) in Spectrum(NCM)	4	125
System Up Time in OneClick should be determined by hrSysUptime13New	0	69
OneClick - Reload xml files16New	0	25
Tech Tip:  What is the difference between the attributes IfAlias (0x117Fe) and Internal_If_Alias (0x11f82)?	2	65
Tech Tip: How to change the Serial_Number of a device model in Spectrum	0	36
OSPF events/alarms not generated in Spectrum	5	62
how and where do I go to create BGP alerts?  S	1	39
Create Event using Restful API	9	564
Devices in Maintenance Mode report?	3	71
Tues Tip: Which Global Collections are stored in a SpectroSERVER database	2	967
Urgent: Assistance on 3rd party integration with SBGW	4	68
Create an Alarm when a device is removed from Spectrum	4	959
Spec KB:  NO CPU and Memory displayed in "Performance" tab and "Thresholds and Watches" subview for devices	0	11
Spec KB:  After changing the hostname of the SpectroSERVER server, no longer able to connect via CLI	0	17
Community Update August 2014	1	244
Resolving Statistic Poller Error Messages	1	69
Trap Exploder - Odd Behavior	0	34
Survey Launches for CA Spectrum Customers	0	36
Need some DCI guidence	5	89
How to populate Global Collections with the Modeling Gateway	2	78
IMPROVE RESILIENCE OF SPECTRUM NCM CAPTURES2New	0	53
To have an Alarm History that keeps and show historical alarm details instead of historical event data18New	2	87
STACKED Devices to show all Serial Numbers14Under review	1	41
create multiple filters for one alarm in Spectrum	2	74
Remove a scheduled maintenance once run4New	1	38
Support Spectrum running on CentOS12New	8	126
CA Spectrum Power Users: Ever thought of writing a book?	0	65
Tech Tip: How to create a SpectroWatch on the Virtual Host Manager model in Spectrum?	0	36
Is there a way to create a watch for Virtual Host Manager since there is no watch configuration available in the Information tab of the model.	3	43
Tech Tip: What are the entries under "Alarm Configuration" for an interface model for?	0	53
Need Help on Event Procedures	4	77
How much bandwidth does Spectrum require for monitoring?	1	61
Spectrum REST API - Getting Alarm List Filtered by Security String	2	106
Add a notes field for maintenance mode80Under review	7	83
Spectrum REST - update list attributes - instances5New	1	20
Event Procedure Issue	0	33
Discovery	6	90
Spectrum SPM HTTPS test - userid and password should not be required	2	61
DDMDB Events	5	583
How to monitor VMS systems?	0	36
Spectrum Hotfix 12 and AlarmNotifier/SANM issue	2	163
CA Spectrum REST WEB API speed...why it's so slow?	26	235
CA Spectrum	7	469
Spectrum Videos	0	175
CA World '14 session catalog available	0	43
anyone tried 2012 R2 integration with spectrum	0	37
Spectrum Tech Tips	0	228
Spec KB:  Requirements for using Spectrum VPN Manager in a Distributed Environment	0	25
Windows Service table Monitoring	4	57
IM Community board meeting	0	31
SRM Maintenance	0	28
Reloading Filters Without Restarting OneClick	9	105

 

 

From: Dempsey, Declan
Sent: 15 September 2014 12:51
Subject: RE: JULY Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Newly published Tecdocs:

 

1. The document [ Updating CA Spectrum models to utilize the Spectrum 9.4 device certification updates.  ] has been published as TEC614051
2. The document [ CA Spectrum 9.4 OneClick clients require JRE 1.7.0_60 as well as the installation of JCEUnlimited Strength files ] has been published as TEC614052
3. The document [ List of third party upgrades in CA Spectrum 9.4 ] has been published as TEC614053
4. The document [ CA Spectrum's Internal_If_Alias attribute does not match the devices actual ifAlias entry for ports ] has been published as TEC614054
5. The document [ Communication attributes differ from parent alarms in CA SPECTRUM when setting the model type default flag ] has been published as TEC614055
6. The document [ CA Spectrum model reconfigurations are not automatically running when iftable changes happen ] has been published as TEC614056
7. The document [ Device rebooted events are not occurring after the device has been rebooted in CA Spectrum ] has been published as TEC614057
8. The document [ CA Spectrum 9.4 supports Cisco IOS-XE for Network Confirmation Manager (NCM) ] has been published as TEC614058
9. The document [ Does the RSA BSAFE DUAL_EC_DRBG vulnerability affect CA Spectrum or its components? ] has been published as TEC614149
10. The document [ Setting up a working user security concept for Report Manager user accounts ] has been published as TEC614150
11. The document [ CA Spectrum 9.4 and CA Nimsoft 7.6 integration fails to authenticate due to lack of nisrest probe ] has been published as TEC614248
12. The document [  Java Authentication Dialog When Launching the OneClick Console ] has been published as TEC613428
13. The document [ Setting up a working user security concept for Report Manager user accounts ] has been published as TEC614150
14. The document [ Cabi 3.3 upgrade doesn't reveal the labels in the output report ] has been published as TEC614237
15. The document [ Is Spectrum 9.2 supported on Linux Redhat 6 ] has been published as TEC614234
16. The document [ How to map an alarm on a process model to its parent model ] has been published as TEC614232
17. The document [ How to pass new attribute to Service Desk ticket from Spectrum Alarms ] has been published as TEC614357
18. The document [ Sybase ASA Client Connection Broadcast Remote Information Disclosure vulnerability with Cabi 3.3 ] has been published as TEC614356
19. The document [ EEM 12.5 compatibility with Spectrum 9.x ] has been published as TEC614355
20. The document [ Service models show incorrect status in Service Dashboard ] has been published as TEC614389
21. The document [ How to turn on MySQL General Query Logging without restarting the MySQL Server ] has been published as TEC614598
22. The document [ Is it possible to use the attribute WA_Link when creating custom SRM Ad Hoc Reports ] has been published as TEC614599
23. The document [ CA Spectrum 9.4 Device Certification list ] has been published as TEC614602
24. The document [ Spectrum SOI Connector 2.0.0.186 Released ] has been published as TEC614851

 

Technical tips / Posts to CA Spectrum Community board:

 

Title	Replies	Views
CA Spectrum Alarm Filter Enhancement – to nest filter options15New	0	26
Combine VMware ESX Host model with SNMP Model16New	1	17
Wrong Connections Through Needless Interfaces18New	2	23
VLAN Bandwidth Utilization % issue in ehealth.	4	115
Spectrum Trap, mapping of varbind number value to pre-determined text value	2	71
Free CA Spectrum Training, July 22 & Aug 12	0	109
Central Console-Managing System Edge	6	76
Best practices to model device with multiple "critical" IPs	7	115
CA Spectrum - Oneclick - Log memory utilization0New	1	19
NCM script for HP switches	5	616
CA Spectrum SNMP Profile Management10New	1	87
CPU utilization monitoring6New	0	73
Differntiate physical and virtual links within Topology Map49Under review	0	25
Watches and thresholds -Spectrum	3	70
CA Spectrum - Distributed alarm filter2New	1	41
Free Training: Quick & Easy Fault Isolation in CA Spectrum	0	140
Free Training: Building Customized Role Privileges with CA Spectrum	0	170
Tuesday Tip: Adding firmware version column to locater search results list	6	1123
Cisco WLC management	1	30
Android based Tab for Spectrum console9Currently Planned	3	32
SPECTRUM 9.4 and SystemEDGE	2	87
Mobile OneClick66Currently Planned	9	95
Configuration	2	70
Device Certification of Cisco 5500 WLC6New	1	36
More User_Asset attributes21New	3	81
Including additional info in Event Message	4	572
Tech Tip - Is Spectrum 9.2 supported on Linux Redhat 6	0	16
Deleted Device  appear on Asset Report	4	97
Is anyone using Embedded Entitlements Manager with Spectrum and eHealth ?    What versions if so ?	4	79
July 2014 Webcast Transcript	0	54
IM Community Update Power Point Slide Deck	0	74
July 2014 Webcast - IM Product Group Vision and Strategy Review	6	127
Script to Automatically run Spectrum Integrated Discovery Profiles	0	49
New CA Spectrum 9.4 option to rediscover connections during a scheduled discovery	0	63
Spectrum REST API - output in json	4	205
Modellinggateway via Webservice33Under review	8	39
Maintenance mode privileges in roles in Spectrum	2	37
Config Capture of Cisco Wireless Controllers -NCM9New	0	24
July Webcast - Spectrum 9.4 Key Features & Demo followed by Roadmap	0	76
Quality testing service packs and hotfixes11Delivered	8	48
RFC 2790 FileSystem Bytes Free23Not planned	1	19
Make Alarm history visible in Spectrum GUI122Delivered	10	116
Make it possible to remove a loaded MIB file from Spectrum MIB tools88Delivered	6	44
Add a 'Last Occurred' timestamp to an alarm66Delivered	7	29
Cisco ASA 55xx Series Support6Delivered	1	44
Spectrum Bookshelf	11	144
Spectrum REST-API - filter alarms by OneClick user/group alarm filter4New	1	18
Spectrum Rulesets to Modify Sysedge Monitors11Not planned	3	21
a possibility to (Re)discover physical connection changes reliably for already modeled devices and topologies17Delivered	3	23
Drag and Drop Feature21Not planned	1	22
Enhanced Certification for Cisco Cat385048P6Delivered	1	19
Support of "FabricPath and vPC+" by CA Spectrum5Currently Planned	2	14
mysql 64bit2Currently Planned	1	51
Microsoft Internet Explorer 11 Support24Currently Planned	4	98
Support the use of Java 78Delivered	2	44
OneClick enabled for Ipad/Tablet devices16Currently Planned	2	20
Develop a queue for "Discover Connections"46Under review	2	65
Tuesday Tip: How to configure Backup Location server on OneClick server	2	897
Unregistering an NPC/CAPC data source	0	41
Spectrum Privileges	0	51
Technical Tip: Need to store value of additional attribute instance from threshold SpectroWatch attribute instance	0	21
SysEdge Alert - MICROSOFT HYPER-V MANAGER PROXY UNAVAILABLE	0	12
Calling all Tweeters	0	26
Customizing OneClick Topology Views	2	38
Sending event message of clear event via mail	0	14
Flexible Maintenance Mode Schedules33New	5	40
Additional Enterasys Device Support Required10New	4	23
IM2.0 alert messages do not have any alarm details. Please add the port name, port description, current rate, threshold setting like netvoyant had.29New	2	16
Problem with Capture Host Configurations0New	0	20
Configure Oneclick cookies to use 'Secure' flag6New	6	45
Spectrum 9.3 on Redhat error	2	33
how to add dynamic members in global collection via CLI	2	31
SPM tests - Condition Correlation Editor	5	100
Spectrum 9.4 Key Features & Demo followed by Roadmap Webcast Transcript	0	81
Allow Spectrum to change all model attributes including Model type     when a model is reconfigured and changes are detected.23Under review	2	37
Background Images in OneClick Topology Tab	10	65
CA User Communities24New	0	25
Secondary SS Status @ Connection Status - Console29New	1	78
capture start-upconfig from Cisco devices to Spectrum	22	151
Spectrum Host Monitors. CA Please Add more features and enhancements20Not planned	14	174
Spectrum X64 app36Currently Planned	15	173
Ability to export topology maps in Visio format32Under review	5	86
First Step	0	28
Spectrum - eHealth gateway should support delete and SNMPV39New	5	114
How this community helped launch Spectrum 9.4	0	45
Alarm occurrences available in SRM reports3New	1	24
Privilege/Permission Design in Spectrum9New	0	33
INFOVIEW Editing Sceduled Reports13New	0	16
Possibility to set dynamic alarm titles by the Event Configurator GUI19Not planned	8	62
Enhanced Device Certification for Cisco Nexus 70048Under review	1	26
F5 BigIP 6900 certification for firmware 11.2.07Under review	1	18
Route Explorer version 10.1.3-R compatible with existing Spectrum version.1New	4	32
VMware Host maintenance mode37Under review	11	35
Process Traps during maintenance18New	0	17
catalina.out Backup File8New	0	20
OneClick - Performance - Recording34Under review	1	67
Report on model deletion	5	942
SPM HTTP test modification2New	0	31

 

 

From: Dempsey, Declan
Sent: 21 July 2014 13:17
Subject: RE: JUNE Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Newly published Tecdocs:

 

1. TEC612055
2. TEC612051
3. TEC612057
4. TEC612059
5. TEC612058
6. TEC612426
7. TEC612703
8. TEC612984
9. TEC612991
10. TEC612561
11. TEC613303

 

Technical tips / Posts to CA Spectrum Community board:

 

Title	Replies	Views
poller and memory limt7New	0	13
Alarm Notifier-Terminates	2	46
Can you monitor a processes memory usage in Spectrum ? (pt 2)	4	84
Missing Devices-No notifications	6	51
No Events in Spectrum from NPC	0	17
Spectrum History	6	50
Export device list	0	17
SPM HTTP test modification1New	0	20
Cisco WLC management	0	17
CA Spectrum Customers participate in TechValidate Research	0	22
issues with AlarmNotifier	4	61
Spectrum OneClick Client performance patch for 9.3 H01	0	45
Stop Alarm notifier	4	46
Different Time Zones1New	0	5
Revoke the device from maintenance mode automatically once planned maintenance is over6New	0	16
Option to remodel / re-interrogate models?	3	33
create multiple alarms in Spectrum	1	35
Technical Tip:  How to pick up MAC address changes in Spectrum.	4	222
IM2.0  Netqos Weathermap9New	0	28
IM Community WIKI Front Page	0	139
Looking for the IM Community WIKI?	0	77
Cisco ASA 55xx Series Support6New	0	27
WAN link terminated as Ethernet interface not showing Link status is Spectrum & ehealth9New	0	13
Full IOS details to be included on the contents pane in Spectrum as a column0New	0	46
Command line to change the Bandwidth of list of interfaces in ehealth version 6.3.1	3	36
Using Host_Device for SBGW	3	48
How Pass any SPECTRUM's Attribute thought Alarm Notifier??	3	1897
Resolving Statistic Poller Error Messages	0	21
Trying to get server sensor data in eHealth.  All I get is "status", which is always "up".	2	18
FAILURE TO BIND TO A TRAP PORT	2	31
Installed Software-Monitor	0	13
IDC interviewed five of our Infrastructure Monitoring customers - Read the report	0	14
Enable Maintenance Mode for all Modeltypes10New	0	25
perl script	4	1240
Ideas management enhancement28New	0	74
Service performance test	1	16
Spectrum maintenance	0	28
Seth Godin - The tribes we lead	0	26
Disablin Virtual Interfaces	1	39
Certify Cisco BGP traps7New	2	16
Multicast Manager support for RFC 51324New	0	20
Spectrum Host Monitors. CA Please Add more features and enhancements20New	1	34
Icmp error in VNM.OUT	1	1130
CA eHealth - Backup and Recovery	0	50
Command line to change the Bandwidth of list of interfaces in ehealth version 6.3.1	3	36
Using Host_Device for SBGW	3	48
How Pass any SPECTRUM's Attribute thought Alarm Notifier??	3	1897
Resolving Statistic Poller Error Messages	0	21
Trying to get server sensor data in eHealth.  All I get is "status", which is always "up".	2	18
FAILURE TO BIND TO A TRAP PORT	2	31
Installed Software-Monitor	0	13
IDC interviewed five of our Infrastructure Monitoring customers - Read the report	0	14
Enable Maintenance Mode for all Modeltypes10New	0	25
perl script	4	1240
Ideas management enhancement28New	0	74
Service performance test	1	16
Spectrum maintenance	0	28
Seth Godin - The tribes we lead	0	26
Disablin Virtual Interfaces	1	39
Certify Cisco BGP traps7New	2	16
Multicast Manager support for RFC 51324New	0	20
Spectrum Host Monitors. CA Please Add more features and enhancements20New	1	34
Icmp error in VNM.OUT	1	1130
CA eHealth - Backup and Recovery	0	50
Spectrum integration with LDAP5New		21
Stop Alarms Being Cleared if a Trouble Ticket is present	4	63
Query an OID before generating an Event	2	45
AlarmNotifier acts bizarrely while processing alarms, generated through custom event	0	30
Spectrum Bookshelf	0	34
Alarm Notifier Not Using New Event Format File	5	539
Spectrum-ehealth integration in 9.3 H01 - Alarm Detail Report missing link	2	115
Reloading Filters Without Restarting OneClick	7	76
display ehealth poller name in Livehealth alarm in Spectrum8New	0	18
HOW TO AUTOMATE THE UPDATING OF THE NCM LOCAL COMMUNICATION CONFIGURATIONS	0	81
On behalf of 21571436-1 - P2 - SINGAPORE HEALTH SERVICES PTE LTD - Stack Switch complete support in Spectrum8New	3	7
Add Acknowledge User and Acknowledge Datetime column to Alarm Details8New	1	8
Support the use of Java 78New	0	33
NOTIFIER. OUT size limit8New	0	13
NCM Certify New Devices8Currently Planned	3	12
Edit Maintenance Schedule in Spectrum7New	1	13
SRM should not sync asset attributes by event, but independently/automatically7New	0	11
Enhanced Device Certification for Cisco Nexus 70047New	0	7
Don't delete nsTunnelIF models with same ip address pair7New	0	8
Update Certification Web Database Search with Spectrum/eHealth version, FW Level and Model # of Device7New	0	16
Increase Capacity of Event reporting7New	0	6
Sorted response in Spectrum RestFul Webservice7New	0	5
Support for Layer 2 Netflow7New	1	6
catalina.out Backup File7New	0	10
To have an Alarm History that keeps and show historical alarm details instead of historical event data7New	0	6
Online Chat Support7New	0	16
Relative time filtering of alarms7New	0	6
Managing users' filters7New	0	3
Spectrum Trap Mapping in a DSS Env using AlarmNotifier7New	0	5
Filter/log traps before event processing7New	1	6
Configurable date/time Format in OneClick7New	0	10
ADA r9.2 integration with Spectrum7New	0	18
F5 BigIP 6900 certification for firmware 11.2.06New	0	5
Filtr mechanism for Spectrum DataSource6New	1	4
Make it possible to discover IP NAT IPranges in Spectrum6New	1	5
Enhanced Certification for Cisco Cat385048P6New	0	8
Aliasing6New	0	8
Request for CISCO PIX Firewall Security Module Certification6New	1	9
Application Performance Dasboard Map On NPC6New	0	6
Device Certification6New	1	7
Update Needed to Spectrum Sizer Utility.6New	0	7
There's no mail authentication function in Spectrum6New	0	7
Report Manager Performance Improvement5New	0	9
Remove model type from catalog5New	0	4
Spectrum VPN list manager do not inherit security strings configured5New	0	3
NCM Support for CISCO ASA/PIX fire walls out of the box5New	0	6
Spectrum SCOM Connector in HA environment5New	0	4
Context sensitive right click integration between Spectrum and CAPC5New	0	6
Juniper VLAN ID's in Spectrum OneClick5New	0	5
Support of "FabricPath and vPC+" by CA Spectrum5New	1	5
Fortinet Firewalls certification for Spectrum5Delivered	1	8
Export trap support files without mapping a trap5New	1	3
see also normal alarms in the navigation window.5New	0	4
NO CHASSIS ALARM 4 JUNIPER DEVICES5New	0	4
Spectrum SCOM Connector in DSS Environment5New	0	5
Logs of changes in the Event Configuration5New	1	5
Filter in Interface-Tab-View in OneClick5New	0	4
Load SSPerformance data into NPC5New	4	4
OneClick Location Menu pick option5New	0	5
VMWare Heart Beat support5New	0	11
Delete connections by right click menu in the interface table5New	0	5
Rolling Maintenance for CA SPECTRUM4New	0	8
Enabling and disabling of particular monitored parameter automatically based on date and time4New	0	6
Map Service Alarms Incidents as parent tickets to child Alarms/tickets4New	0	3
Correct title for System Up Time field in Spectrum OneClick4New	1	7
Show Alarms CLI to show Alarm Title4New	0	6
Extreme X460 Support required4New	1	5
Easy button to publish closed tickets to knowledge base4New	0	5
Spectroserver - split debug data from VNM.OUT or add VNM.OUT log rotation4New	0	6
Map Alarm Severity to Incident Severity in CA Service Desk4New	0	4

 

 

 

From: Dempsey, Declan
Sent: 19 June 2014 12:17
Subject: RE: MAY Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Newly published Tecdocs:

 

1. TEC611348
2. TEC610739
3. TEC610966
4. TEC610965
5. TEC611231
6. TEC611232
7. TEC611233
8. TEC611234
9. TEC611236
10. TEC611348
11. TEC611298
12. TEC611400
13. TEC611572

 

Technical tips / Posts to CA Spectrum Community board:

 

With the move to the new system the dates have been reset to 14^th Jun so not able to compile this month.

 

 

From: Dempsey, Declan
Sent: 19 May 2014 13:25
Subject: RE: April Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Newly published Tecdocs:

 

1. TEC608492
2. TEC609392
3. TEC609397
4. TEC610110
5. TEC609810
6. TEC609811

 

Technical tips / Posts to CA Spectrum Community board:

 

https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19

 

Title	Posts	Views
Integrated Service Now with Spectrum	7	89
can servicedesk integration be used for other ticketing	8	788
Alarm on Watch Status	9	155
Spectrum REST API - Getting Alarm List Filtered by Security String	2	34
Spectrum REST API - output in json	3	50
"Auditing" MIBs in CA Spectrum 9.3	2	39
Spectrum 9.2 installation on Windows 2008 R2 server	2	21
March Published Tecdocs / Technical tips / Posts to CA Spectrum Community	1	28
TrapExpolder	1	26
script to update spectrum alarm fields	4	78
CA Spectrum 9.3 and BOXI 3.3. reports problem	2	55
where i can be downloaded spectrum 9.3.0 version	4	54
Parse a Single Varbind into Multiple Event Variables	1	25
SRM Reports on Physical Entities	1	22
Different Alarm Scripts in Spectrum	6	79
Trouble Ticket -Not Reflecting	5	40
Spectrum RESTful WS - Get Alarms by wildcard or substring search	3	50
Event Procedures examples of basic calculations	1	25
Link Down Alarm on Port Connecting to Device on Maintenance Mode	2	43
Folder level monitoring	6	98
Spectrum-ehealth integration in 9.3 H01 - Alarm Detail Report missing link	2	46
Alerting parameters-Spectrum	1	19
how to stop all vnmsh connections from CLI	5	43
Huawei Spectrum HIGH CPU UTLILIZATION	3	25
ca spectrum upgradation	3	35
Systemedge SNMP V3 discovery in Spectrum	7	54
Enabling Alerts	12	143
Need info from event log text	3	20
Change RESTFUL output XML to JSON	2	262
export favorites?	2	199
DMVPN monitoring in Spectrum	8	627
Error message creating Global Collection	6	140
NCM email alert	2	43
Error while opening report Manager after upgrading the CA Spectrum	4	43
CA Business Intelligence r3.3 -Question about Updates, TechDocs etc.	1	44
Patch Monitor	3	33
NCM script for HP switches	4	503
Spectrum-Empty SANM	4	61
CA Spectrum - start shell script over Spectrum	2	26
Spectrum DB does not start	2	25
Alarm console problem	2	41
How to run system commands at event	2	44
Deleted Device appear on Asset Report	3	27
Upgradation of Spectrum from 9.2.2 H11 to 9.3 latest	6	135
Spectrum: tracking device name changes	1	29
Spectrum H09 Downgrade	2	49
Remaining the troubleshooters	3	45
copy event value to one column in connect panel	5	48
BSI integration with YCS software	2	47
Spectrum REST API - Getting a Device List	6	75
Merge two DSS into one	3	31
Event Severity not displaying v9.3	2	36
Spectrum 9.4 Early Validation Begins in 2 weeks	9	329
Exchange monitoring issues	1	18
Cluster monitoring false alerts	1	22
Catalina errors in spectrum	9	1457
SNMP get next loop detected	1	19
SSO with Spectrum and InfoView	2	27
Which BOXI Install DVD	2	20
Spectrum - NetQos RA (9.01) MIB error	9	1257
VmWare and Spectrum	1	22
dispaly id( who has Acknowledged that alarm )	2	22
Dynamic Alarm Title and Alarm Notifier	3	100
Updating CA Spectrum r9.2 H09 License Key	3	44
AD Authentication to Spectrum	2	49
Set ICMP test with DHCP	2	65
Spectrum able to Ignore High memory utilisation?	6	1860
Spectrum Export Help	7	107
Cisco HSRP	2	31
CA Spectrum and device interfaces	6	140
Spectrum integration with LDAP	3	44
TR-069 Support or Capabilities	1	22
CA Spectrum r9.2.x End of Service Announcement	1	97
Create connections using restful API	3	82
NCM - passing TFTP address in an SSH script	4	132
Spectrum-Email Notification	5	134

 

 

 

From: Dempsey, Declan
Sent: 29 April 2014 13:33
Subject: RE: March Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Newly published Tecdocs:

 

1. Adding columns to OneClick list view ] has been published as TEC607265
2. Troubleshooter Email template will not display values for attributes in email ] has been published as TEC607472
3. When attempting to create a report using the Web Intelligence Document and then Spectrum Ad Hoc MySQL EN universe an error: WIJ20002 is received has been published as TEC607486
4. When using CA Spectrum with CA VCAIM, after a server is discovered with SNMP, the model is moved automatically and prevents movement to another container has been published as TEC607473
5. A discovery run of Enterasys devices could result in a SpectroSERVER crash with an error message of out of memory. ] has been published as TEC607552
6. Service Dashboard topology will have the items listed in reverse order ] has been published as TEC607553
7. Tomcat Local Host Access Log does not contain hostname or IP address. ] has been published as TEC607901
8. Troubleshooter Email template will not display values for attributes in email ] has been published as TEC607472
9. How to enable debug for Spectrum's telnet daemon (telnetd) ] has been published as TEC608102
10. OneClick server.xml file contains the clear text password for the keystore ] has been published as TEC608101

 

Technical tips / Posts to CA Spectrum Community board:

 

https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19

 

Title	Posts	Views
MLS failover not working & affects one-click login.	3	47
making Trouble tickets as hyperlink in Spectrum Console.	8	260
Pingable Devices on Landscape	3	30
Fanout behavior	3	57
Command line or silent uninstall of Spectrum	5	56
Model_Type or Model with the attribute Alarm_Status (0x11f4f)	3	45
February Published Tecdocs / Tech tips / Posts to CA Spectrum Community	1	98
Configure elements (Spectrum)	7	121
SDC in mixed 9.2.1 and 9.3 environment	3	179
Custom Branding in Spectrum 9.3.HO1	6	135
Automating WATCH & File System monitor creation...	2	34
Spectrum - Memory Threshold	8	106
Spectrum and GIS (Google Map) integration	19	2655
RE: Session time-out(one click console)	1	37
monitoring Feautres	1	35
Missing VNM Model on Spectrum	6	751
Alarm Notifier Not Using New Event Format File	5	378
Hibernate discovery?	2	43
High memory utilization alarm on linux based devices	14	333
SNMPv3 context for Brocade virtual fabrics	6	613
Nexus 7000 VDC monitoring	2	66
Spectrum Sooutbound Gateway	1	40
SPECTRUM - EmailNotification	1	41
Company Logo in CA Spectrum One click	7	433
Virtual Firewall Monitoring	2	50
Upgrade Spectrum	4	74
Spectrum 9.4 - Release Date.	1	86
Spectrum - Htofix Patch11	2	35
SPECTRUM-UI Servers	2	38
Fanouts	2	56
MPLS Transport Manager	5	450
Modeling with GnSNMPMibDetPt	3	64
Chassis vs Device contact status	2	58
InfoView_User Defined Attributes VALUE	2	54
Add Device Connected Column to Global Collection List View	3	281
Export associations using Modeling Gateway	1	29
Generating alert since trap for two devices with same IP and different name	2	44
LDAP or EEM with Spectrum	3	41
How to monitoring Oracle BEA WebLogic with CA Spectrum	1	19
NCM fails to capture configuration	1	56
Spectrum FT	3	33
TraceRoute menu in Oneclick	6	116
Stack Switches Inventory Information	3	55
Pathtrace	1	21
snmp v3 AES 256 bits supported?	1	16
Message "Event watch registration failed for domain" in catalina.out	2	210
Backup and Restore of Spectrum Business Objects on Linux	1	24
Sysedge directory monitoring	11	2641
SPECTRUM - EMail Notification Alerts	3	125
Pipe visibility in topology view	1	18
Spectrum 9.3 support for Redhat 6.4	3	51
Create Custom Event Rule	5	1490
Reports via Spectrum	7	426
End of Life / End of Support	2	101
hide particular device in all alerts filter	2	134
CABI Spectrum Reports	1	101
Spectrum email Notification script	6	1872
Pdf of the schema database of Spectrum?	2	245

 

 

 

 

 

 

From: Dempsey, Declan
Sent: 28 March 2014 11:10
Subject: RE: February Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Newly published Tecdocs:

 

1. CABI installation fail with Unable to find installed locale ] has been published as TEC606160
2. How to check the total number of traps that have been received by a device since the last SpectroSERVER restart ] has been published as TEC606162
3. Preventing IP Redundancy Preferred Addresses from being deleted from the RPA table ] has been published as TEC606865
4. How are MAC addresses displayed in Spectrum OneClick ] has been published as TEC605841
5. Spectrum Hotfix patch H01 for 9.3 - fixes and enhancements ] has been published as TEC605903
6. JSPs and Servlets vulnerability in Cabi 3.3 ] has been published as TEC605960
7. Event 0X3b10010 not defined properly ] has been published as TEC605966
8. Requirements for using Spectrum VPN Manager in a Distributed Environment ] has been published as TEC605967
9. Null pointer exception on Service Desk integration configuration page with Spectrum 9.3 (non-English versions) and EEM. ] has been published as TEC606230
10. Events from the Nimsoft integration are not mapping to the expected models in Spectrum. ] has been published as TEC606259
11. OneClick Client will not launch after updating Java to JRE 1.7 update 51 ] has been published as TEC606260
12. How to make Date type dimension filtering by time in Query Filter of WEBI report ] has been published as TEC606261
13. Spectrum 9.3 H01 install fails with "Unsupported upgrade path" error ] has been published as TEC606862

 

Technical tips / Posts to CA Spectrum Community board:

 

https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19

 

Title	Posts	Views
Configure alarm from events originated from different devices	6	272
Sysedge for linux 32 bit	1	54
RE: Alarms not Clearing	3	190
Cisco VPN specific Alerts	2	34
How to Forward all events from Spectrum	7	132
Configuration Manager Script for Riverbed	5	471
Problem Changing the IP Address of a router-model	8	325
Show devices connect to switch	2	152
Handling 2 devices with multiple duplicate IP's	5	209
OneClick Menu Customization	1	95
Spectrum VPLS Manager	10	1041
Are OptiSwitch- NBase switch communicationRT devices supported.	2	63
SILENT DISTRIBUTED INSTALL FAILS	6	109
vCenter 5.5 monitoring	3	360
Spectrum LDAP Integration User Enhancement	1	83
not getting ping alert in Spectrum	8	96
CPU Memory parameter for checkpoint firewall	4	223
InfoView - using User Specified Device Attributes	6	1073
OneClick Slow Startup	8	436
xml Based Policy Configuration	3	78
RE: [CA Spectrum] Archive Manager / No User Problems	5	1343
Live Health: Time Over Threshold 1120a Alarm	5	268
Custom Column for most recent alarm occurrence time	3	591
Spectrum ParseMap Files	2	125
Work around for supporting RFC3020(FR-MFR-MIB)	2	156
Is Dell PowerEdge M1000E a certified enclosure for Spectrum 9.3?	1	87
When will Spectrum 9.3 H01 be released?	2	198
Auto discovery	5	750
Upgrading to Spectrum 9.3	11	746
ca spectrum router WAn port discovery	3	168
SSDB load is getting failed.	8	421
Problems monitoring huge VMWare environments	3	386
ON LINUX - Migrate CABI/BOXI from production to development	1	92
GC based on maintenance schedule	9	596
Spectrum sizing tool	6	1135
FANTASTIC Customer Produced Document regarding Correlation Condition Editor	6	879
Riverbed Steelhead Configuration Support	4	339
Condition Correlation of Process Down Events?	4	489
Missing Scheduled reports	1	99
supressed ports not included in total port cpunt	3	168
Spectrum Network Configuration Management	3	171
Spectrum 9.3 Key Considerations	10	911
Number of CPU's from Solaris server...	4	502
SystemEDGE and DB2 Insight AIM...	6	609
ca spectrum How to discover public ip router(Internet )	4	406
Generating System info report	4	488
Not getting event for log monitoring match	11	853
CA Spectrum® r9.1.0 Japanese End of Service Announcement	1	93
Including additional info in Event Message	4	381
January Published Tecdocs / Technical tips / Posts to CA Spectrum Community	1	147
Wrong port ifAdminStatus	1	59
Brocade DCX Backbones virtual switch monitoring	1	52
NCM Sync task issue (Script configured for device returned no configuration	1	51

 

 

 

 

From: Dempsey, Declan
Sent: 27 February 2014 11:57
Subject: RE: January Published Tecdocs / Technical tips / Posts to CA Spectrum Community board

 

Hello all,

 

Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Newly published Tecdocs:

 

1. TEC603943
2. TEC603941
3. TEC603940
4. TEC604024
5. TEC604025
6. TEC604026
7. TEC604275
8. TEC604906
9. TEC604895
10. TEC604896
11. TEC604901
12. TEC605395
13. TEC605396
14. TEC605397
15. TEC603943
16. TEC604795

 

Technical tips / Posts to CA Spectrum Community board:

 

https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19

 

Title	Posts	Views
Any plans for MYSQL64?	3	85
Network Services Discovery Problem	1	90
Service desk description	8	320
Event Procedures Spectrum 9.3	2	97
Alarm Notifier Not Using New Event Format File	4	249
Service desk notification	4	182
Ping Test	6	370
Spectrum - discover VCenter and ESX servers but exclude VMs	7	238
Event Reports no Results	6	165
NCM script (Reload Cisco IOS)	2	102
LINK UP DOWN TRAPS	2	152
hide Maintenance tab	3	224
Process start by event	4	254
Best practices with Secure Domain Connector	3	607
December Published Tecdocs / Technical tips / Posts to CA Spectrum Communit	1	102
CA Spectrum Getting a Specific Event or Alarm With RESTFUL	3	187
Spectrum Polling	6	582
Change Live Link to aggregate condition status	1	80
Integration of CA Spectrum with HP Service Manager	2	297
CA Spectrum 9.3 installed and unable to launch OneClick administration	13	379
Cisco Device not in a device family	24	1731
DMVPN monitoring in Spectrum	4	367
Gather Component Details from Command line	2	131
CA Spectrum 9.3 SOI Connector GA Announcement	1	74
Sysedge doesn´t work	3	333
stopping system clearing of alarms	2	218
Not getting any event or alarm while trying to monitor log/event.	7	267
NetApp - Monitor the remaining available inodes	3	223
New CA Spectrum Connector - Now GA!	1	134
Device discovery	3	163
Trigger new event when an existing alarm is cleared by service desk	5	414
ServiceDesk Integration with Spectrum	6	1637
Spectrum 9.3 H01 - Release Date	3	242
Spectrum Server Unable to do HTTPS SPM Test	5	293
Disable WAN components during RESTFul initiated 'Discover Connections'	1	51
maintenance scheduling on variable dates	5	252
SSO	2	100
RESTFul obtain attribute enumerations	3	230
Global Collection from policy violators	3	347
Spectrum Host Name Connected	2	141
Landscape list in SANM	3	297
Web Services and Actions	3	197
Rebooting devices with Spectrum	3	128
Remainder Mails	1	67
Trap not received on spectrum from DSM(SAP) tool	3	177
OneClick Customization. Problem using renderers	6	124
Download link for Spectrum 9.3	6	277
Spectrum 9.3 released and available for download	5	809
Spectrum SSdb recovery discussion	2	295
Spectrum - Cluster Service	4	158
SPECTRUM-VNMDB.Lock	2	191
SPM Custom Script?	4	483
No Line Terminators Spectrum 9.3 ECE	5	254
Attributes doesn't appear in Watches	4	140
Recieve Event can I assert this to a different host?	3	257
CA Spectrum to monitor cisco UCS	5	183
64bit Client	1	88
My Spectrum Alarms, Favorites, Best Practices.	2	157
Cisco WLC event issue	2	191
OS Performance tuning on RHEL6	2	166