DX NetOps

 View Only
  • 1.  Network Flow Analisys no display Router Address

    Posted 10 days ago
    my ca nfa is not showing the router address, however see the information coming via wireshark.

    already checked the bank and could not find the same.
    I already tested snmpd, which passed successfully from the nfa server.

    How can I make it appear on the console or that the tool interprets that such information is coming.

    Cássio


  • 2.  RE: Network Flow Analisys no display Router Address

    Posted 9 days ago
    Hi Cássio

    This article describing the required netflow fields may help: https://community.broadcom.com/communities/community-home/digestviewer/viewthread?MID=712868

    A generic flow record template is:

    flow record NFA
    match ipv4 tos
    match ipv4 protocol
    match ipv4 source address
    match ipv4 destination address
    match transport source-port
    match transport destination-port
    match interface input
    collect interface output
    collect counter bytes
    collect counter packets
    collect timestamp sys-uptime first
    collect timestamp sys-uptime last

    Good luck,
    Steve