DX NetOps

  • Private Community
 View Only

  • 1.  when generate  BGP backward transition trap and when generate BGP peering session lost

    Posted Apr 17, 2017 08:48 AM

    Hi All,

    can any one confirm when we get BGP backward transition trap and when  BGP peering session lost trap  on ca spectrum and what difference between them.

     

    regards,

    Amit rai



  • 2.  Re: when generate  BGP backward transition trap and when generate BGP peering session lost

    Posted Apr 20, 2017 06:35 PM

    Do you have the event or pcause id's?



  • 3.  Re: when generate  BGP backward transition trap and when generate BGP peering session lost

    Posted Apr 25, 2017 11:42 AM

    event code for bgp back word ==00220011

    BGP peering session =00220051 



  • 4.  Re: when generate  BGP backward transition trap and when generate BGP peering session lost
    Best Answer

    Posted Apr 27, 2017 12:35 PM

    Amit,

     

    The BGP Backward Transition alarm for event code 0x220011 is generated from a trap. Specifically the bgpBackwardTransition defined in the BGP4-MIB as follows:

     

    bgpBackwardTransition NOTIFICATION-TYPE
    OBJECTS { bgpPeerLastError,
    bgpPeerState }
    STATUS deprecated
    DESCRIPTION
    "The bgpBackwardTransition event is generated
    when the BGP FSM moves from a higher numbered
    state to a lower numbered state.

    This Notification has been replaced by the
    bgpBackwardTransNotification Notification."
    ::= { bgpTraps 2 }

     

    The LOST BGP PEERING SESSION alarm associated with the 0x220051 event is based on Spectrum proactively polling the bgpPeerTable for the status of the session. Reference the "BGP Peer Session Monitoring" section of the documentation.

     

    BGP Peer Session Monitoring - CA Spectrum - 10.2 and 10.2.1 - CA Technologies Documentation 

     

    Joe