Hi Scott,
Thank you for sharing the document, it was very useful.
I am able to create and execute Self service Catalog tile successfully now. I had to create DSN-less connection for executing the test match otherwise it was throwing connection error.
Just more one input required, when I am submitting the request again, it is executing the previous Active tests as well.
Is there any option to deselect it. If 2 testes are submitting requests then 2nd tester will get the data executed by 1st tester in the report. I have tried selecting "Clear down prior matches" from TDoD options as well.
Can you please assist here. Much Appreciated
Regards.
------------------------------
Project Lead
Wipro Technologies
------------------------------
Original Message:
Sent: 05-04-2021 10:26 AM
From: Scott Schmitz
Subject: ARD for Find and Reserve
@Ashish Jaiswal I'm attaching a full end-to-end setup document that can be used with the provided sample db. I hope this is helpful to determine where your implementation needs to be refined.
Original Message:
Sent: 05-04-2021 02:15 AM
From: Ashish Jaiswal
Subject: ARD for Find and Reserve
@Scott Schmitz, we are not getting any reports generated as such using ARD (Self service tile), it is just showing as failed. Below is the response.
Summary of the child requests created for request ID 112824:
Request ID | Type | Status | Source | Scheduled Time | Start Time | End Time | Status Message |
---|
112825 | TESTMATCH | Failed | Self-service | 2021-05-04 00:08:47.0 | 2021-05-04 00:08:47.82 | null | null |
Do you have any case scenario built for it so that we can refer it on how it can be achieved using ARD and how it will look under Self service catalog. Can you please share.
Regards.
------------------------------
Project Lead
Wipro Technologies
Original Message:
Sent: 05-03-2021 04:45 PM
From: Scott Schmitz
Subject: ARD for Find and Reserve
Kran, I've setup a Test Match find in ARD and exposed it as a Self Service tile. It executed properly. Could you forward the report that gets generated as a result of the Self Service?
Original Message:
Sent: 04-30-2021 04:56 AM
From: Karan
Subject: ARD for Find and Reserve
Hi Scott,
As Ashish is on leave, so I'm following up on this thread for today, as he provided the use case, did you get a chance to look at the use case and analyze our issue.
Can you please provide some solution for this.
Thanks
Original Message:
Sent: 04-23-2021 02:56 PM
From: Scott Schmitz
Subject: ARD for Find and Reserve
@Ashish Jaiswal Is it possible to create a simple model / data test case to share with us that exhibits this behaivor?
Original Message:
Sent: 04-21-2021 11:58 PM
From: Ashish Jaiswal
Subject: ARD for Find and Reserve
Hi Scott,
We have created 1 test case for test match and while executing it directly through datamaker, it is giving us proper result as per the defined test conditions in report.
After saving it through ARD on Dataset, it is visible on Self Service catalog but after submission it is getting failed. We have already selected the "test conditions" in Set Test Match option.
Can you please assist.
Regards.
Original Message:
Sent: 04-21-2021 03:10 PM
From: Scott Schmitz
Subject: ARD for Find and Reserve
You would save the ARD model into a TDM project Data Group/Data Set that is of type Agile Designer
Original Message:
Sent: 04-21-2021 06:48 AM
From: Ashish Jaiswal
Subject: ARD for Find and Reserve
Hi Scott,
Thank you.
We have created the Test Match pool in Data Maker and through ARD we are able to locate the created Test Match using "Find System Data" and "Set Test Match" .
While saving to TDM Repository, do we need to create another pool and set it as ARD and save the above ARD flow or is there any other option?
Regards,
Original Message:
Sent: 04-20-2021 01:54 PM
From: Scott Schmitz
Subject: ARD for Find and Reserve
@Ashish Jaiswal ARD can use the "classic" Find and Reserve to reserve data from the Test Match datapools.
Original Message:
Sent: 04-19-2021 12:18 PM
From: Ashish Jaiswal
Subject: ARD for Find and Reserve
Hi Team,
Is there any way to apply find and reserve data functionality using Agile Requirements Designer?
Regards,