Yes, I got your point, it should work provided correct filters are set. Nothing more needs to be done . I have it set up in our environment
I made sure the appropriate iftypes are part of the filter
take a look at the filter report tab under monitored devices , you might find some clue
------------------------------
Senior Systems Engineer
DXC Technology
------------------------------
Original Message:
Sent: 07-04-2019 11:51 AM
From: Pedro Filipe Lourenço
Subject: subinterfaces on PM vs Spectrum
Hi,
ifType - propVirtual / l2vlan
IfAdminStatus - up....
ifOperStatus - up...
Once again, I can see bundle interface on CA PM, I want to see the tree of interfaces that are on this bundle, just that.
BR,
Pedro Lourenço
Original Message:
Sent: 07-03-2019 07:38 PM
From: Phani Devulapalli
Subject: subinterfaces on PM vs Spectrum
What is the ifType , IfAdminStatus, ifOperStatus of the sub interface that you are trying to discover ? You should be able to check this info form Spectrum.
------------------------------
Senior Systems Engineer
DXC Technology
Original Message:
Sent: 07-02-2019 04:20 AM
From: Pedro Filipe Lourenço
Subject: subinterfaces on PM vs Spectrum
Hi,
I only have this:
BR,
Pedro Lourenço
Original Message:
Sent: 07-02-2019 12:30 AM
From: Phani Devulapalli
Subject: subinterfaces on PM vs Spectrum
The sub-interfaces inside the Bundle might of type l2vlan(135) , do you have the filter for l2vlan(135) components to be discovered set in the Metric family/monitoring profile assigned to the device ?
This could be the issue or check the sub interface type in Spectrum and make sure that is enabled in filters in CA PM
------------------------------
Senior Systems Engineer
DXC Technology
Original Message:
Sent: 06-27-2019 12:14 PM
From: Pedro Filipe Lourenço
Subject: subinterfaces on PM vs Spectrum
Hi,
I enabled alternate interface MF. But looks similar.
Maybe I did not explain so well, so, I can see bundle interfaces, which I can't see is what interfaces are in this bundle. At least I don't know where I can find that information.
Like we can do on spectrum.
BR,
Pedro Lourenço
Original Message:
Sent: 06-27-2019 11:25 AM
From: Praveen Venkatesan
Subject: subinterfaces on PM vs Spectrum
Hi Pedro ,
Whether have you enable metric family for those interfaces ,enable alternate interfcae family and check once
Original Message:
Sent: 06-27-2019 04:11 AM
From: Pedro Filipe Lourenço
Subject: subinterfaces on PM vs Spectrum
Hi,
Yes.Still the same, we don't have subinterfaces for any device, only interfaces.
So, you are saying that we can see for a trunk interface, all the interfaces that are for that trunk interface? on PM?
Can you please send an image as example?
BR,
Pedro Lourenço
Original Message:
Sent: 06-27-2019 03:09 AM
From: Marcelo Zacchi
Subject: subinterfaces on PM vs Spectrum
Hi Pedro,
Have you tried reconfiguring the device? You might need to do that for the new sub-interfaces to be discovered.
Regards,
------------------------------
Marcelo Zacchi
CA Spectrum consultant
Nets Denmark
Original Message:
Sent: 06-26-2019 01:04 PM
From: Pedro Filipe Lourenço
Subject: subinterfaces on PM vs Spectrum
Hi,
Why I can't see subinterfaces on PM but for Spectrum we can see that?
There is any way to activate that?
We want to see the subinterfaces of a bundle/trunk interface...
BR,
Pedro Lourenço
------------------------------
CA PM, CA Spectrum subinterfaces
------------------------------